ORC B18C, no drive...!

[EvilJDM]

Hey guy's

Just installed my new ORC but I dont seem to have any drive, Clutch isnt engaged tho I started the car pressed pedal and you can hear it dis/engaged

Ive bled the clutch line and have **** all clutch aswell, the pedal is lucky to spring back

What am I doing wrong here, must be to early for me!...

Help, Im having VTEC withdrawals!...

[geeang]

If the pedal is having a hard time springing back then rebleed the clutch line and check your master cylinder for leaks.

[EvilJDM]

Bled it so many times no air, nor any leak's bud, everything ''was hooked up''(pulled it all out again), and had no gears at all nothing would move I spun the disc by hand and the fly would not even budge

[jdm18c]

I'd say maybe wrong clutch fitted, if your bleed everything me mate had same problem with his

[EvilJDM]

Hmm, how would I check to confirm?, Pressure plate fits on the mainshaft snug

[jdm18c]

have you got the old clutch put em side by side and compare all

[Renaissance_x]

See if the clutch slides smootly down the shaft.
Splines might be wrong.

[EvilJDM]

Thank's for the help guy's, I just pulled everything back out again, and started from scratch and now it's all sweet, Now 1000k's without VTEC...jezz such is life!