Are these any good???

[Beechy]

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250916406912
i wanna no if anyone has used these and r they any good ???

[jdm18c]

havent used but id imagine theyd be ok on a build like cams,head work ect

[mugen_ctr]

"This new V2.0 header is made for the higher compression engines (12+ CR) and/or aftermarket high lift/profile camshafts."

unless u have a full built B18 or B20, id imagine these would be considered worth while.

But since they are "Bisimoto" headers, they are gonna give u gains either way, many ppl in the states rep them, only down side is the massive price tag.....

Seems the price tag is to real to be true, but that i doubt they are real bisimoto headers, real headers from bisi are more like 800 - 1000 rrp lol

[GSi_PSi]

bisimoto headers are not good for a daily car. has massive drop in low end power vs other headers

[aznstyler]

they look fkn insance

[GSi_PSi]

http://weloveincense.com/wp-content/uploads/2011/10/1913333.jpg

[-Tom]

^ rofl

[simmy]

incense

[mocchi]

lulz insance.

[Beechy]

such as what headers??

[GSi_PSi]

please refer to this test,

http://honda-tech.com/showthread.php?t=2969367

[Jccck]

bisimoto headers are not good for a daily car. has massive drop in low end power vs other headers

I believe Bisimoto's test on their F22A Header showed a -4whp below 2000rpm, = at 3000rpm and +27whp at 6500rpm IIRC.
Other headers don't make that much peak power gain, and as a result don't lose as much at the low end.

[mocchi]

I believe Bisimoto's test on their F22A Header showed a -4whp below 2000rpm, = at 3000rpm and +27whp at 6500rpm IIRC.
Other headers don't make that much peak power gain, and as a result don't lose as much at the low end.

if you look properly, beechy is op and he has vti civic. lulz.
2.65" collector for a 1.6ltr engine? massive man. thats massive.

gsi_psi comment seems to relate to op's situation.

but the link is for B series? omfg mindfcuk. whats going on lmzo.

[tiksie]

welcome abourd

I don't think this is suitable for a d16y1 with pod filter and muffler.

[dougie_504]

Buy yourself a $150-200 4-2-1 header with a 2" collector and then get a 2" mild steel catback + hi-flow cat converter to sit between it and your muffler. Anything larger really isn't necessary or advisable for you engine.