Log in

View Full Version : [EG5] Alternator/Power Steering/AC Belt Replacement Question


ccmengs
04-11-2011, 12:53 PM
Hey guys,
I was looking through my engine bay the other day and noticed that one of the three belts mentioned in the title was a bit torn but I don't know which belt it is. Just wandering if anyone could tell me in order from left to right, which belts are which? By left to right i mean when you're looking at the engine bay and how the belts are on the right side of the engine.
I can only find this picture online but it only shows the alternator belt.

http://img157.imageshack.us/img157/2153/acrd5.jpg

Also I'm just wandering if anyone knows how to change the the alternator, power steering or air condition belt on an EG5. I've done a bit of research and I know that its a d16y1 engine and the belts for the components are 4pk775, 4pk800 and 4pk815 respectively. I however cannot seem to find a DIY guide that can help me replace these belts.

Thanks in advance.
mocchi
04-11-2011, 01:01 PM
download manual here (tells you how to do it)
http://www.spoonertuner.com/manuals

using crankshaft pulley as reference point:
-belt that goes to the back of engine is ALTernator.
-belt that goes to front-middle is AC
-belt that goes to front-up is PS

definition of front: where front bar or headlight is.
Bludger
04-11-2011, 01:02 PM
You must spread some Reputation around before giving it to mocchi again.
hmetro24
04-11-2011, 01:09 PM
in to out . alternator > Ac> power steering . It is not a hard job to do.
You loose the Power steering bolts ,
you loose the AC bolts.
you loose the Alternator Bolt.
You take belts out, you put new belts....
You do it backward.
Bludger
04-11-2011, 01:11 PM
in to out . alternator > Ac> power steering . It is not a hard job to do.
You loose the Power steering bolts ,
you loose the AC bolts.
you loose the Alternator Bolt.
You take belts out, you put new belts....
You do it backward.sounds simple

make DIY :)
hmetro24
04-11-2011, 01:19 PM
sounds simple

make DIY :)
It is simple and you know that it is simple.
http://img850.imageshack.us/img850/150/ddaadsad.jpg (http://imageshack.us/photo/my-images/850/ddaadsad.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
mocchi
04-11-2011, 01:22 PM
simple when engine is out of car, scrape your beautiful skin doing it while engine still in car.
i like my girly hand das why.
Bludger
04-11-2011, 01:22 PM
simple when engine is out of car, scrape your beautiful skin doing it while engine still in car.
i like my girly hand das why.
wizard......
ccmengs
04-11-2011, 01:28 PM
wow!
thanks a lot guys for the quick responses, much appreciated :).
will sure get my hands on it after i'm done with my exams.
cheers once again.
Bludger
04-11-2011, 01:30 PM
wow!
thanks a lot guys for the quick responses, much appreciated :).
will sure get my hands on it after i'm done with my exams.
cheers once again.
Make sure you get the right belts.

It's not just the circumference of the belt, it's how wide too.

Better to take them off 1st and take them to the parts shop to compare.
mocchi
04-11-2011, 01:31 PM
wow!
thanks a lot guys for the quick responses, much appreciated :).
will sure get my hands on it after i'm done with my exams.
cheers once again.

ohsc represent. nomsayin.
lulz.