Advice on a new clutch? 92 eg4

[prada21]

Hey all :)

I have been working on my car for a while now. I brought the car with 4x motorcycle ITB's as its intake. And it was carby.. people would of seen my posts. Well basically the conversion to efi is done. And its running perfectly motor wise thanks to a fair few people on here :)

The only issues I have left is I've done all new wiring looms and now my tail lights stay on constantly when the battery is connected which I don't have a clue where to start looking. Need to install new internal fuse box.
And I need a new clutch.

My question is can you guys give me some advice on a new clutch?
I'm looking for something close to stock but I don't have a huge budget..

Id appreciate some ideas and thoughts and advice...

Thanks :)

[blastnpast]

Email sent

[Bludger]

Lights - check your bulbs 1st. Even if they look fine, cheap Chinese bulbs will give you erratic operation..... So yeah, swap in some known working ones and then follow your wires back to the power source, see where the problem is.

Clutch - Bang for buck = exedy....300-350 for oem but better than oem, if you know what i mean.....

[prada21]

Thanks Blast.. you are the man! always reliable :)

Bludger.. they were working fine on the old wiring.. its just now the new looms are in i have an open circuit somehere and i cant find where.
Not only that but i have aftermarket headlights that look like HALO`s but the fookers who i brought the car off dodged the front and tail lights now i cant wire up the headlights cause all the connectors are broken and shit.. and i dont really wanna spend the money on new headlights just to fix them.

Exedy hey? but is it heavy? cause i dont really want heavy as my Miss`s will be driving my car once its running and shes only in auto.. so i dont want something to hard for her to learn on.. and i dont want the daily drive to be a mission :)

You guys are awesome...

[prada21]

Email sent

I havent got it yet?
blueprada21@gmail.com?

[Bludger]

like i said man, oem but better. It's light, don't worry,

Regarding the wiring, you're on your own, no one knows what been done there, so you'll have to figure it out.....

[prada21]

I know.. haha and clearly the guy who done it had no foooking idea either lol!
But for the EFI conversion it goes HARD! :)

yea once im pushing the revs the clutch slips and doesnt grip lol
But it will be fixed better then when i got it ^_^

Ill have a look at the clutch man... i wonder how much it is to install...
And if i do the clutch i might aswell do the flywheel while im there hey? i dont know much about clutches.. is it just the pressure plate that needs to be changed?

[jdm18c]

what engine you have.. may have one

[prada21]

D16y4 efi converted from carby =]

[prada21]

what engine you have.. may have one

Any luck champ?