b16a or b18c

[kane30]

hey people me and my brother both have civics and were going to build enginesfor turbos when we hit our open licences, so just need advice and opinions of doingthis, and if antyone is selling a b16a2 or b18c let us no......

[lilthug]

bigger budget go with the bigger engine

[dougie_504]

If you have D-series just turbo them when you get your full license or go B18C

[Latino CRX]

B18c all way ..

easiest thing when comes to compliance would be B16a as it the same Liter Capacity thats if you have the 1.6L engine already..

[kane30]

I'm having trouble finding a b18 got any Pointers on wear to get one

[DC2-PWR]

you'll be saying goodbye to itr's with this built motor man :)

http://www.ozhonda.com/forum/showthread.php?157428-Wrecking-1996-DC2-VTi-R-B18C2-Motor-Box-Boot-Left-Door-etc.

[BoostnDC2]

I will have a b18c motor/gearbox for sale in the next couple of weeks if you can wait until then :)

[phwoaaa]

b16a prob more cheaper for budget if your going to turbo then i dont see why u need a b18c unless u are chasing a specific build.

[manonastick]

Mind if i hi jack the thread?
What if you have no intension to turbo?? Will the torque on the b18c be very noticible compared to the b16a??

[GSi_PSi]

bbc all the way

[mocchi]

bbc all the way

lmaoooooooooooo

Well if you have no intension to turbo, the torque on the b18c be very noticible compared to the b16a.

[chauster]

Talk talk talk.Non turbo go b18c. Turbos go Nissan

[u mad?]

b18c=much more talky. go with that.

[stndrd]

Talk talk talk.Non turbo go b18c. Turbos go Nissan


:thumbsup: or go K-series

[manonastick]

Would love to get a k24 swap in my ek. . But that cost alot doesnt it?

[u mad?]

Would love to get a k24 swap in my ek. . But that cost alot doesnt it?
yes.


The message you have entered is too short. Please lengthen your message to at least 5 characters.

[chauster]

Would love to get a k24 swap in my ek. . But that cost alot doesnt it?

Cost you 2 b18c. Or 4 b16a. Or 20 d16y. Or 3333 milk teas. Or Probably cost you one bj

[THE 2BSEEN]

I say b20 vtec still cheaper that the k24

170 kw and while building it you can set it up to be turbo'd

[GSi_PSi]

170kw highly strung b series will get butt rap3d by a 150kw fairly stock k24
even so 170kw b series, you will be spending more than k24 swap easy, stop talking smack

[Aleksa]

Hi I bought a b18c half cut from all automotive imports at 17 Mile Rocks, I tried Brisbane motor imports too, but all automotive was cheaper. I found it hard to track down a b18c half also. Hope this helps...