PDA

View Full Version : mFactory Oil Cooler.



AK Type R
14-11-2011, 12:02 PM
Hey Guys.
Just curious about a oil cooler setup has anyone had any experiance with the mFactory unit? or is there any others available on the market. It's going on eg k20 swap, I plan to install it for a few tracking events im going too just to keep things nice and cool.

joe.teg
16-11-2011, 05:46 PM
i have no experience with their oil coolers. although i have experience with their gearing equipment and their products are usually pretty good quality and very reasonably priced. I just looked up the price of their oil cooler as opposed to the price of other setups and its slightly better value. theres my two cents worth :)

na-118
16-11-2011, 05:55 PM
not a bad price, i've been using ebay oil cooler ebay fittings ebay hose, autoexcel sanwhich plate,, looking at about 150 for ebay setup holds up fine

joe.teg
16-11-2011, 07:37 PM
shutup sammy :P

na-118
16-11-2011, 08:40 PM
not a bad price though,,, m factory yo

e240
16-11-2011, 11:24 PM
Funny guys ..haha...

AK, our oil coolers are widely used in cars that see the track. We took it off for a little while but then customers kept asking for it cause ebay jobbies didn't cope - so we brought it back.

I've been using my kit for about 4 years now! my most recent car had an ebay jobbie, i was lazy and kept it on and it sprung a leak around the filter seal at the track, so now lesson learnt, I've swapped it back to my trusty Mfactory unit.. :-p