Will these wheels fit!?

[Impulse4Integra]

Hey guys, recently bought a 95 VTi-R and i've found a smashing set of wheels to suit.
I've done alot of research as to sizes that fit it and what looks best..
I want a set of 16" XXR 521 16x8 114.3x4 +20

http://www.nlmotoring.com/v/vspfiles/photos/52168082N-2.jpg

I want to be sure they will fit, so whats the verdict?

[Lukey]

right sized tyres and guards rolled, maybe a bit of negative camber (natural could be enough)

[Impulse4Integra]

Cheers Lukey
Is rolling the guards is necessary do you know or are you just assuming?

[Johnie]

Yeah will fit if your teg is 4 studs as its multi

[ekvtec]

Cheers Lukey
Is rolling the guards is necessary do you know or are you just assuming?

is it necessary...unless instead of going low you getting 4wd lifters

[kyzz]

what suspension you running? like stated you most likely will have to roll your guards like lukey said but negative camber would look better, however you'll get uneven wear on the tyres, if your willing to pay the price for looks, but IMO form>function. 16" should be fine with any guard rubbing from body roll depending on stiffness of your suspension, but might clip inner guard..

[Lukey]

what suspension you running? like stated you most likely will have to roll your guards like lukey said but negative camber would look better, however you'll get uneven wear on the tyres, if your willing to pay the price for looks, but IMO form>function. 16" should be fine with any guard rubbing from body roll depending on stiffness of your suspension, but might clip inner guard..

camber doesnt kill tyres as quickly as toe

[Impulse4Integra]

Yeah will fit if your teg is 4 studs as its multi
Sorry should have specified, its a lude not a teg:P

[Tegzieboi_BAR]

Wrong PCD for a dc2 ur after 4x100

[Tegzieboi_BAR]

Whoops just saw the above post, yea they should fit pretty comfortably I'd say, some rolling more than likely depending on tyre size n how low u go

[vinnY]

^ won't fit vti-r ludes
they're 5x114.3, the si's are 4x114.3

edit; my bad, fourth gen not fifth gen as pointed out below

[MWAKU]

his got the 95, not the 97+.

how low is ur car tho, the if ur tucking, then as lukey said, it will rely on tyres and ur natural camber, and youll need ur guards rolled if ur tucking, otherwise ur might start scrubbing going up n down ramps and doing full locks

[Impulse4Integra]

his got the 95, not the 97+.

how low is ur car tho, the if ur tucking, then as lukey said, it will rely on tyres and ur natural camber, and youll need ur guards rolled if ur tucking, otherwise ur might start scrubbing going up n down ramps and doing full locks

Yeah, cool thanks everyone its currently at standard ride hide but i plan to lower it an inch; just above the tyre but it seems rolling the fenders will be in order.
Time to take out the trusty baseball bat :P

[Lukey]

slam it.