HELP!!! how to install FN2R Seats into EM1 / EK??

[IV73CI]

As the title says,

will the FN2R Seats fit the EM1/EK using what rails?

ive got EK9 rails but only the front bolts line up but the rear doesnt..

has anyone done this or know how to retro fit?

or is there a bolt on rails that can be bought?

ive searched the entire universe and cant find the specific to what im hoping to solve.

thanks

[IV73CI]

any1 know how to fit this fhukker in? lol

[DakDak]

Charlie from gpc fit a pair to a dc2 using custom made rails.

[IV73CI]

Charlie from gpc fit a pair to a dc2 using custom made rails.

thanks bud.

so looks like ill have to retro fit these seats into my EM1 rails or EK9 rails....

[williamwong]

best solution for you would be lining up the seat and rails, bolt the front, mark the rear bolt locations, then drill a hole on the rails.

[1900-hustler]

pretty sure you need custom rails to suit as oem ones dont line up (unless you want to drill more holes into your car..

you would also need to get low rails as the seat is taller than SR3's for example and the top of the seat will hit the cabin roof when you tilt forward to allow passangers in the back

[marquee]

Im not sure if this is legal but could you get an extra peice of metal bolt it the rail then make sure its long enough to bolt back down to the floor

[jdm18c]

any mod is illegal lol

[IV73CI]

any mod is illegal lol

^^ x2 ..

but whats not legal nowadays? lol ..

hehehe

i think ill have to retro fit my old EM/EK rails and weld the mounting points to the FN2R rails. so alot of cutting and welding will be required.

i dont want to destroy the EK9 rails that i have - as i can sell this fhukker if i dont need it anymore.

But worse care scenario - from what ppl said above -

if the FN2R sits higher then i might have to use the EK9 rails as they sit lower?

am i right or wrong?

praise the lord!! lol