View Full Version : xxr 521
sammutn90
29-01-2012, 04:21 PM
hey
I was just wondering if this wheels in 16X8 fit a ek
Thanks
charliebrown
29-01-2012, 04:28 PM
+20 offset? looks tough on EK if you do it right. pic to give you idea of how far it pokes
http://farm7.staticflickr.com/6046/6423637929_b364b13909_z.jpg
sammutn90
29-01-2012, 04:59 PM
that looks good man did you have to roll the guards or do you have spacers on them
trism
29-01-2012, 05:05 PM
that makes no sense
charliebrown
29-01-2012, 05:05 PM
That's not mine, a pic from a previous JDMST meet. Don't think there's spacers. If you wanted it to look good you'll have to go heaps lower. For the front, bend the lip a bit, heat and mould the fender liners (or remove). For the rears will need roll, trim and maybe relocate the rear bumper screw. This is all assuming stock camber arms and slightly stretched tyres, like a 195/45/16 would be ideal
sammutn90
29-01-2012, 05:10 PM
alright sounds good thanks man
Frosty-Civic
30-01-2012, 02:06 AM
http://i1131.photobucket.com/albums/m542/phongskiee/IMG_9483.jpg
16x8 + 20. all four guards are rolled, fronts are slightly flared. stock camber. 195 45 tyres :thumbsup:
sammutn90
03-02-2012, 05:39 PM
nice so that with stock camber could I buy Front and rear camber arms if I wanted or leave it with stock arms
blastnpast
16-02-2012, 10:20 AM
Yes that is correct :D
Emnesty
20-03-2012, 07:56 PM
http://i1131.photobucket.com/albums/m542/phongskiee/IMG_9483.jpg
16x8 + 20. all four guards are rolled, fronts are slightly flared. stock camber. 195 45 tyres :thumbsup:
What wheels are these?? 521?
^ yes sir
They will fit but will poke. Requires rolled gaurds
Emnesty
21-03-2012, 06:14 AM
^ yes sir
They will fit but will poke. Requires rolled gaurds
Cool
Looks good man..
Rolling the guards wont tuck those rims under.. They are just too wide..
But idgaf .. Id do it! Lol
blastnpast
21-03-2012, 12:20 PM
Yeah just throw up a camber kit and you will clear anything dude recently popped mine under! No scrubbing at all Riding on function & form coilovers purchased from JDMaccessories.com.au http://img.tapatalk.com/31b73912-3af9-308c.jpg
civic2026
29-04-2012, 06:08 PM
ive been looking everywhere for 521's or 522's, but all places are out of stock or dont ship to aus etc
can anyone point me in the right direction?
cheers
jajaja
29-04-2012, 07:21 PM
^jdmyard?
charliebrown
29-04-2012, 07:27 PM
ive been looking everywhere for 521's or 522's, but all places are out of stock or dont ship to aus etc
can anyone point me in the right direction?
cheers
PM sent
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.