MWAKU
07-02-2012, 01:34 PM
my cars on coilovers and tucks at the rears, and so it has a slight natural camber. and my guards are rolled. not pumped.
anyway, from past experience, i've ran 255/45/17 via 17x9 +35 wheels at the rear with no problems, so im assuming if i run 255/30/20 via 20x10 wheels, it would be the same? since the tyre width is the same and so as the rolling diamater of the wheels.
yes no? so the 17s didn't stretch, where as the 255 on the x10s will stretch. am i wrong? or will i find some clearance issues.
i have a euro. the only problem im concerned about is the wheel hitting the struts/coilovers, but then i can't be certain if they will or not since i dont know the offset on the 20x10s
anyway, from past experience, i've ran 255/45/17 via 17x9 +35 wheels at the rear with no problems, so im assuming if i run 255/30/20 via 20x10 wheels, it would be the same? since the tyre width is the same and so as the rolling diamater of the wheels.
yes no? so the 17s didn't stretch, where as the 255 on the x10s will stretch. am i wrong? or will i find some clearance issues.
i have a euro. the only problem im concerned about is the wheel hitting the struts/coilovers, but then i can't be certain if they will or not since i dont know the offset on the 20x10s