Bonnet adjustment - urgent

[CRXDEL501]

Bonnet on eg seems to hanging over the front bar a bit
Doesn't really line up.
Anyone know if the bonnet can be adjusted back?

Need help asap

Thanks!

[senna]

You should be able to loosen the bolts on the bonnet brackets so you can adjust the position.

Its a little tricky by yourself, so grab a mate to give you a hand. :thumbsup:

[CRXDEL501]

You should be able to loosen the bolts on the bonnet brackets so you can adjust the position.

Its a little tricky by yourself, so grab a mate to give you a hand. :thumbsup:

Cheers man
Do you know which bolts to undo?

[dougie_504]

The ones that hinge it to the car, see if there's some play that can push it up towards the windscreen (like when a bolt goes through an oval hole and can wiggle one way or the other).

[evil_1998]

should be 2 bolts each side:
http://i10.photobucket.com/albums/a117/pyro_524/bonnet.png

[senna]

^^^ Thats them

[CRXDEL501]

Are they the bolts on the actual bonnet on the chassis?
That pic shows them as being on the bonnet

[dougie_504]

Which one did you mess with? lol

[evil_1998]

Are they the bolts on the actual bonnet on the chassis?
That pic shows them as being on the bonnet

They are bolts on the bonnet. Look at the positions highlighted, you should be able to find them ok.

[CRXDEL501]

Which one did you mess with? lol

Haha haven't touched any yet

Been busy doing panel work lol

If they are definitely the ones highlighted I know which they are

[viinnh]

i see lots of eg. its actually because the rad support has been bent back.

look at your bonnet and guard. if they line up then its your bar/ rad support

[CRXDEL501]

i see lots of eg. its actually because the rad support has been bent back.

look at your bonnet and guard. if they line up then its your bar/ rad support

yeah gave it a go this arvo, safe to say thats the case... rad support has been back from what i can see.

[white_ep3_civic]

Mine does the same thing but not very noticeable from a small hit in the front