PDA

View Full Version : [CL9] SRS Impact Sensor



euro24L
23-02-2012, 07:04 PM
My CL9 is giving a constant SRS error of 41-10 which is "No signal from LF impact sensor". Clearing the SRS memory didn't make a difference.

1. Where is the sensor located exactly? I think I found it just under the battery ahead of the front left tire near the air resonator. (see images below)

2. How do I get a T30 screwdriver into that narrow area? I can barely fit my fingers in there, and the large cylinder thing in front seems to be solid metal.

3. Do you think replacing the sensor will fix error 41-10? It's worth a try I guess.

4. When replacing the sensor do you need to disconnect the airbags and tensioners? Or just the negative battery terminal after a 3 minute wait? Or just replace it while the car is off?

211322113321134

euro24L
26-02-2012, 01:13 AM
Anyone?

dorikin
26-02-2012, 11:51 AM
If in doubt download the Honda Factory Service Manual (FSM) (http://www.ozhonda.com/forum/showthread.php?111148-CL9-service-manual).

and if you're having trouble finding info on Aussie boards try searching for Acrua TSX in the U.S forums i.e. http://www.acura-cl.com/forums/showpost.php?p=10772767&postcount=3

euro24L
27-02-2012, 07:51 PM
The factory service manual is different to the workshop manual? That rapidshare link is broken but thanks anyway. I've already tried some US sites.

roony
27-02-2012, 07:56 PM
http://www.hondahookup.com/manuals/?file=Acura

this should work as I downloaded it recently, just have to register. File is 252mb

euro24L
04-03-2012, 11:45 PM
Thanks I'll have a look.