Random rolling bolt/nut/screw noise

[Newtype]

Hey guys, recently ive noticed a sound thats become very anoyying to deal with.
it seems to be a screw or something thats rolling around when i turn right or left.
Anyone had this problem before. I removed my entire trunk lining and looked where the spare wheel area is located and still cant find it.

The sound seems to be metal on metal sound.

Thanks

[RIHIA]

any work done recently ? what was last touched ?

[Newtype]

centre console, but the sound seems to be rolling from one side of the car to the other when i turn my car.

[vyets]

prob a screw or plastic clip fell off and it's rattling around, only you would be able to find where it's from lmao. Just gotta start ripping stuff out. I had a bolt loose in my trunk in my old car it was impossible to get out :( so annoying lol

[YeahByuddy]

so hard to diagnose through screen newtype,try to use bass test track and search around car till you find rattle

[AusS2000]

Have you checked the glove box for your GFs earrings?

[Bludger]

as Trism would say

"another quality ozhonda thread"

[trism]

as Trism would say

"another quality ozhonda thread"

A++ will post comment again.

[RIHIA]

Have you checked the glove box for your GFs earrings?

Hahaha

[CRXDEL501]

as Trism would say

"another quality ozhonda thread"

LOLZ :thumbsup:

[J-K]

Got my car back from the shop today but noticed a sound that didnt exist before :O I didn't have enough time on my hands tonite so i couldn't investigate it thoroughly.
I'm assuming its the spare tire nut :S....anyone know how the proper "steps" on fixing it?

[Bludger]

Got my car back from the shop today but noticed a sound that didnt exist before :O I didn't have enough time on my hands tonite so i couldn't investigate it thoroughly.
I'm assuming its the spare tire nut :S....anyone know how the proper "steps" on fixing it?
1 - find nut
2 - tighten

[trism]

Got my car back from the shop today but noticed a sound that didnt exist before :O I didn't have enough time on my hands tonite so i couldn't investigate it thoroughly.
I'm assuming its the spare tire nut :S....anyone know how the proper "steps" on fixing it?

You honestly cannot be serious can you?

You want us to tell you over the internet, how to find, diagnose, and fix what appears to be a lose bolt somewhere?

http://i0.kym-cdn.com/photos/images/original/000/126/314/3cd8a33a.png

[hondapop]

Reminds me of when we were kids at the local Sat arvo movies (when the theatres had wooden floors) and we'd sit up the back and roll Jaffas down the floor.

[J-K]

@trism
Well...getting the car back after 3 traumatizing months due to a repairs and if you notice a sound that wasnt there before...it drives you nuts. well, sure did for me.
All i could do was "assume" last night, i just wanted to see if anyone could give any heads up.
But before coming to work this morning, i have managed to tighten the nut HOPING it was the source where the sound was coming from. no problems so far *fingers crossed

but thanks for your input, so much for a community forum....sigh

[Bludger]

@trism
Well...getting the car back after 3 traumatizing months due to a repairs and if you notice a sound that wasnt there before...it drives you nuts. well, sure did for me.
All i could do was "assume" last night, i just wanted to see if anyone could give any heads up.
But before coming to work this morning, i have managed to tighten the nut HOPING it was the source where the sound was coming from. no problems so far *fingers crossed

but thanks for your input, so much for a community forum....sigh
off questions get off replies.

[J-K]

off questions get off replies.

I can see where you're coming from. no doubt about that.
excuse my stupidity, the question itself was based on my lack of knowlegde of the car (only had it for 3 weeks).
But that sort of response wasnt necessary imo. mehhh

[trism]

Mate, that response was tame.

[J-K]

I figured you would agree to that.

Just to put it out there, I did say IMO :P

[mocchi]

so did you find source of rattle?

[J-K]

Not too sure yet. Will look into it further after work this arvo!

[mocchi]

Not too sure yet. Will look into it further after work this arvo!

loose bolt rattle is very annoying indeed.
had to rip out rear panel trim in my cibik cos i dropped a nut aND forgot about it.

[Bludger]

loose bolt rattle is very annoying indeed.
had to rip out rear panel trim in my cibik cos i dropped a nut a forgot about it.
could you re-attach the nut?

[mocchi]

could you re-attach the nut?

it was rear shock nut, dropped one couldnt get to it, did something else and forgot about that nut.
got back to it and found its missing nut, so i grabbed a nut from my nut box.

[Bludger]

it was rear shock nut, dropped one couldnt get to it, did something else and forgot about that nut.
got back to it and found its missing nut, so i grabbed a nut from my nut box.
how many nuts do you have?

[mocchi]

how many nuts do you have?

2.

http://2nuts.com.ru

[Bludger]

2.

http://2nuts.com.ru
had 2, lost 1, grabbed another, found the 1 you lost, that equals 3?

[CRXDEL501]

had 2, lost 1, grabbed another, found the 1 you lost, that equals 3?

quit trollin hahahaha

[dlai5552]

This is such a spam thread. Anyways, did OP find his missing nut?

[Engin09]

Random rolling bolt/nut/screw noise
Hey guys, recently ive noticed a sound thats become very anoyying to deal with.
it seems to be a screw or something thats rolling around when i turn right or left.
Anyone had this problem before. I removed my entire trunk lining and looked where the spare wheel area is located and still cant find it.

The sound seems to be metal on metal sound.

Thanks

Its the end of a pop rivet in the framework of your roof (the metal bars that go across if framework was too complicated), open the ends (should be a plastic cap) and it should fall out of one side or the other..

[trism]

Thanks for bumping a month old thread.

[VeYzZii]

I still dont get why my thread gets closed because i wanted to manufacture cooling plates, but a thread about a loose nut seems to hit it off.

[trism]

because ozhonda

[Bludger]

needs to be captioned.

http://cdn.geckoandfly.com/wp-content/uploads/2012/01/ancient_aliens_guy.jpg

[CRXDEL501]

needs to be captioned.

http://cdn.geckoandfly.com/wp-content/uploads/2012/01/ancient_aliens_guy.jpg

Mmm yessss indeed

[Engin09]

I still dont get why my thread gets closed because i wanted to manufacture cooling plates, but a thread about a loose nut seems to hit it off.

Lmfao.

cause bumping on ozhonda makes such a difference to where it was on the list before..

[mocchi]

I still dont get why my thread gets closed because i wanted to manufacture cooling plates, but a thread about a loose nut seems to hit it off.

you wanted to copy a product. not manufacture. subtly different.

[VeYzZii]

No. I wanted to use a product as a template. And then manufacture. For me. Which is legal.

[CRXDEL501]

No. I wanted to use a product as a template. And then manufacture. For me. Which is legal.

Lol right