DC2R Red Badges

[tseesinngwailo]

Hey All,
My badges are worn and I need new ones, have a really good condition rear, but how is it supposed to be held on, is there some kind of nylon grommets that hold it in? my car doesnt have them as previous fake badge was double sided taped on..

Cheers
Chris

[CRXDEL501]

usually use glue...
i dont see the fake one with double sided badge not doing the job, if you want a fake one.
if not, go honda get the orginals, and you will be able to buy the glue as well
or get fake ones, and go get the glue and dont use the double sided tape

[DTN]

the originals have two pins at the back and goes into two holes on the bumper. You can just use glue but it might not be in the exact centre if your fussy lol

[tseesinngwailo]

I thought the badges were held in by some kind of grommet ?, dont want to glue if I can avoid it, i have a near new genuine badge for the rear, and will get a new front one soon, want to avoid fakes as when they fade they look crappy. Do the originals have thick double sided tape?

[anzai]

i used a double sided mounting tape i got from bunnings

said its waterproof and it seems to be true so far, 7 months no problem, i dont suppose its gonna fall off anytime soon

i got a used oem one thats missing the 2 pins, so grab your ruler and start measuring if ur anal

[foujee]

Use two small screws, double sided tape and super glue and bam no dramas

[Indie]

Until they get nicked by some ****.

[Evok]

2 pins with support of double sided tape or glue, buy some genuine badges from honda or some supplier :)

You can notice the difference between fake and real :( + Fake does not have pins