91' ED6 Build!!

[Pepsinator]

Hey guys!!:p
Im new to Hondas as i guess ive never seen the potential as i never owned one!
well now i do :D
i picked up this mint 91 ED6 GL from my friend which he took immaculate car of it

180xxx on the original engine
5 speed!
1.5 D15B? :o
Integra lip
factory rear spoiler

here she is sitting pretty!!
http://img7.imageshack.us/img7/7483/20120221180757.jpg
next to my soon to be old car :')
http://img638.imageshack.us/img638/6197/47120115802611098356010.jpg
will get some interior/engine shots soon

my plans are !

15x7 +20 White Rota Grid V ( TE37v Copys)
red anodized wheel nuts
Tanabe front and rear strut braces
repaint black front , back and side trim and have a red stripe like the "Si" model
honda primo windscreen banner ;D
so basicly
Like this
just with the Rota Grid Vs instead :)
(and vtec stickers ofc haha)

http://img846.imageshack.us/img846/9263/041td.jpg

little shoop:cool:
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/423662_165856946867143_100003285163185_230565_6151 47878_n.jpg

other car should be sold soon
to make way for parts ;D

[trism]

That's actually and ED6. The ED9 was the Aus delivered CRX.

But it looks good condition, and your plans look good.

[Pepsinator]

Ahhh thanks for clearing that up. :'D

[markismaximus]

hmmm looks clean. nice find.

pretty funny actually, I also went from turbo nissan back to honda.

[Pepsinator]

DIY painted the front lip and front bumper black trim section
lol...
i ran outta paint -_-
also the color aint the same grrr
ohh well
i have the right color code now and im gonna do the side trims and rear trim
and redo the front trim and lip -__-

http://img40.imageshack.us/img40/1323/20120306181019.jpg

[dougie_504]

Looks clean man I like it :thumbsup:

[Pepsinator]

thanks man :D

[FAITHLESS]

hmmm looks clean. nice find.

pretty funny actually, I also went from turbo nissan back to honda.

lol me too :)

[Pepsinator]

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/427051_168924643227040_100003285163185_237714_2097 647710_n.jpg
New rims ;D

[Drifter995]

dem's some biiig wheels :o
should look epic though :D
question: those look like 5 stud wheels.. what hubs will you go for for the 5stud?

[pat88c]

new wheels look better tham Rota grids but won't fit without spend another 1k LOL

Nice plan look forward to updates soon

[Pepsinator]

ahhah they're my wheels from my skyline ;D
that i will be selling soon ahha

im still 90% keen on those rota grid classics
just unsure how they will really sit on my car :S

also got quoted for a both bumper resprays and trim resprays
$400 not bad!!!

[mooshie]

Where did you get quoted that price for he painting? Pretty good price, are you doing some of the work yourself or is that all up?

[Pepsinator]

was actually 500$ my bad!!!!
but im sanding down my rear bumper
and just removing trims
then he will paint them along with the front bumper (fix it a bit ) and repaint the lip


he also painted my skyline front bumper, lip and roof spoiler
top job good price and awesome guy!
tell him Pierre sent ya!
Spikes Auto

http://www.facebook.com/pages/Spikes-Auto/158230884227791?sk=wall

[Pepsinator]

Updates!!!!!!!
Both front and rear tanabe strut braces have been shipped :D
cant wait
then 27th comes around and wheels and coilovers are next!

[Pepsinator]

strut braces are on
AND OMG
the car feels AMAZING!!!!!!!!!!!

[EKVTIR-T]

Makes a difference on them old fwd cars ay

Bet the steering feels sweet

[Pepsinator]

it feels so quick and nimble
cant wait for my coils, rims and tyres to arrive!!!

:D :D cant wait

heres some new pics
shes shiny and clean

NEw JDM air freshener!!!!! lemonade !
it wasnt 52 bucks dw this is a mates photo! hes got the same one
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/430077_10150740313273628_720898627_11517900_178801 3555_n.jpg
http://www.facebook.com/photo.php?fbid=10150740313273628&set=a.10150220736933628.350984.720898627&type=3
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/539622_177123329073838_100003285163185_263110_5411 44582_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/526493_177124349073736_100003285163185_263117_4802 47605_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/531806_177124302407074_100003285163185_263116_3756 35124_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/551659_177123479073823_100003285163185_263114_7022 31209_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/523744_177123429073828_100003285163185_263113_1786 052000_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/544529_177123395740498_100003285163185_263112_1932 647948_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/554412_177123352407169_100003285163185_263111_3695 33073_n.jpg

[EKVTIR-T]

Its amazing how those ED civics just have that fun factor and driveability

I know a few non honda drivers who have tried an ED and fell in love with them too.

[markismaximus]

Its amazing how those ED civics just have that fun factor and driveability

I know a few non honda drivers who have tried an ED and fell in love with them too.

how could anybody not... they are sooo sweet

[markismaximus]

Did you purchase the strut braces from the US?

[Pepsinator]

Sure did :)
there is only 1 of each left !!! GET IT QUICK
THEY'RE AMAZING!!!!!!

http://www.ebay.com.au/itm/TANABE-STRUT-TOWER-BAR-88-91-CIVIC-CRX-EF-REAR-/290609093175?pt=Motors_Car_Truck_Parts_Accessories&hash=item43a9a6da37

http://www.ebay.com.au/itm/TANABE-STRUT-TOWER-BAR-88-91-CIVIC-CRX-EF-FRONT-/290609093283?pt=Motors_Car_Truck_Parts_Accessories&hash=item43a9a6daa3

[Pepsinator]

Ok!
Picking up a pair of enkei RPF1's
for a bargaiN!

then gonna pick up a nardi deep corn on sunday!! :D
and just ordered a set of rota grid classics :)
so stuff will be happening soonish~~~

thing is im unsure if i should buy this lip?
www.nengun.com/osaka-jdm/evil-star-wing
http://osaka-jdm.jp/osaka-jdm/parts/img/DVC00572.JPG

[V73C]

J's racing wing ? Do eeeeet !

[Pepsinator]

UPDATES :DDD

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/532249_182805851838919_100003285163185_279803_7927 83767_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/403867_182807525172085_100003285163185_279813_1739 861677_n.jpg

[mooshie]

Saw those enkies for sale, even if you buy another 2 at full retail price it's still a bargain! Good purchase.

[Pepsinator]

Hahha yeah was a steal. :)

[dougie_504]

Sweet parts bro

[Pepsinator]

repainted the front bumper
not going the white red
to much hassle and money that i wont get back
gonna just have black with red line

also did some clarke rubber sideskirts and rear lip haha
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/552718_183515388434632_2033493407_n.jpg

also gonna get some rota slipstreams instead
as the rota grid classics only come in +20 and i want everything legal
so im gonna just get 15x7 +35 in white hopefully wrapped in some re002's

still unsure about suspension
leaning towards just springs as coils are to expensive !

[FAITHLESS]

what are your plans as far as engine mods/swap?

[Pepsinator]

nothing
just keep the car running well
:)
over here its beyond stupid regarding engine swaps
all cops are ****ing assholes so i will not bother this time

[brad]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/562574_182888178497353_100003285163185_280220_1676 958254_n.jpg



I'M IN YA DRIVEWAY.

:-)

[Pepsinator]

Aww sheeeeeeeeetttttttttttttt

[Setanta]

Looks good - I highly recommend the JDM EF9/XT25 Facelift front end, and rear bar plus rear wing which gives you the wrap around indicators. Much as I like the EDs - I loved my EF9 SiR.

[Pepsinator]

its just a tad to much Setanta
im keeping everything how i got it :)

[Dimmerz]

This is gonna look extra mean when you're finished with it! I reckon yes to that wing too :D

[Bludger]

nice!!!

subscribes.

[Gtstripes]

yeah get the wing, looks sick! get GAB HA coilovers, i have them in my car and they are cumfy for coils and costed me only $600 brand new

[Pepsinator]

that wing was way to expensive so instead i got this one
http://www.ebay.com.au/itm/SRB-POWER-HONDA-CIVIC-EF-REAR-WING-WITHOUT-LIGHT-HOLE-/250914925504?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a6bb1ebc0#ht_584wt_889
its better anyway the other one was just a single little lip (GAY)
its shipped so should be here in a couple of weeks

also 15 x7 +35 white rota slipstreams are ordered and will be here next week~ish

[90civicGL]

Sub'd looking good. Check out my ED build if you want. Liking some of the additions on yours. Looking forward to the next update.

[Pepsinator]

Cheers bud yeah
ive bkmrked your thread

no updates this week
stupid easter!!!

cars running good
tyres are pretty much slicks ;D
so waiting on these rotas to get here hopefully soon so i can get new tyres!

what would be ideal for 7" rim?
i was thinking 185/?? something

[grifty]

205/50 is reccomended for that width, you can go with 195/50 aswell for a a touch of stretch (hardly even noticeable).

[Pepsinator]

haha i want heaps of stretch
im gonna go either
175/45/15 which is what i want but if i cant get that
im gonna get 185/45-50/15

http://media.tumblr.com/tumblr_lybujsiloo1qgbzuz.jpg

[pat88c]

Best go with 205/50r15 for tuff fat tyre look over the silly streach look

Atm I am running 195/50r15 on front and 205/50r15 on 15x6.5
The 205 feel great when there on the front but rotate to rear as they were wearing out feels the car understeer more with 195/50 on the front than on the rear

If you had small 175 or 185 I would hate feel how it would feel on 15x7 rims

Why run small tyrea for a look should have safety first

[Dimmerz]

I reckon go 195/50 for the slight stretch look with added practicality, haha.
Just my opinion though, love stretch tyres, they look like sex but I don't think I would do it myself for a daily..

[Pepsinator]

my 33 had stretch and i never had any problems
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/297778_266150976756014_109368819100898_681750_9457 57359_n.jpg
it wasnt crazy crazy but was a decent amount
i probably will go a 195 as i found some good tyres for cheap
but if not ill run 185s

also updates!!!!!!
wing is here!!!!!
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/525968_189693261150178_100003285163185_300009_6470 09776_n.jpg

[Pepsinator]

TEST FIT YEAH !!!!
god the stock wing is easy to take off hahaa
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/553785_189721041147400_100003285163185_300195_5603 09692_n.jpg

[90civicGL]

TEST FIT YEAH !!!!
god the stock wing is easy to take off hahaa
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/553785_189721041147400_100003285163185_300195_5603 09692_n.jpg

looking good, you going to put 3rd brake light somewhere or just run without?

[Dimmerz]

Loving the 33, haha, huge soft spot for that specific model, wish I had taken more precaution on mine, building the engine stronger rather than just chasing HP, got a good number but it didn't last long :(

Loving the wing btw, do you really need to run a third brake light?

[Pepsinator]

i think i may need to
gonna give regency inspection centre a ring in the morning to ask what shit i can and cant do to the civic
serouisly ADR is pathetic!

[90civicGL]

i think i may need to
gonna give regency inspection centre a ring in the morning to ask what shit i can and cant do to the civic
serouisly ADR is pathetic!

Yer im not sure if its required or not, I know modern jeeps have a light coming up from spare tire as third brake light, but older jeeps and sierras dont have 3rd brak lights. Think there are a couple others out there. But as a general rule almost all cars have a 3rd brake light. So my only guess is its mandatory in QLD, If it is though, mounting a 3rd light at the top of the rear window shouldn't be hard. Or even a little red LED strip connected under the wing on an L bracket might pass. Can imagine there is a few option though.

Giving them a call is defiantly a good idea though.

[Dimmerz]

I love being in Perth for the laws and no RWC's, haha. Even though no-one here knows how to drive, the laws on car modification are not as hard as they are over east, although they are starting to crack down on it. Kind of makes me raise the question, I took the wing off mine, wonder if I need to run the middle light..
What else you got planned for her? Keen to keep watching this thread.

[brad]

Don't bother running with one Pierre, seriously. It's a god damn hatch back, you'll never get picked up on it. You really don't understand that cops just do not care about Hondas over here, yet. I drove my white dc2r around slammed and most cops just looked the other way. Only ever got measured once and he only measured my front lip and ignored the eyebrow height. You'll be fine man.

[Pepsinator]

I love being in Perth for the laws and no RWC's, haha. Even though no-one here knows how to drive, the laws on car modification are not as hard as they are over east, although they are starting to crack down on it. Kind of makes me raise the question, I took the wing off mine, wonder if I need to run the middle light..
What else you got planned for her? Keen to keep watching this thread.
rims will be here soon
and thats pretty much it man
gonna be a sweet little daily :)


Don't bother running with one Pierre, seriously. It's a god damn hatch back, you'll never get picked up on it. You really don't understand that cops just do not care about Hondas over here, yet. I drove my white dc2r around slammed and most cops just looked the other way. Only ever got measured once and he only measured my front lip and ignored the eyebrow height. You'll be fine man.


True man but if everything is all legal it will make me feel so much better

[gen2 CRX]

If you compare it to an ED CRX the 88 model does not have a 3rd brake light but the 89-91 models have the 3rd brake light.

[mooshie]

its a seriously easy thing to install and if you get an LED strip on the inside of the window you wont even see it till it lights up. it is an obvious defect for any police to pick up and then go right over the rest of the car. might as well just do it.

BTW it is mandatory on all vehicles, if not fitted as OEM then must be retro-installed, same with left hand side mirrors.

[grifty]

It is not mandatory on all vehicles :p (personal imports), there are different rules for vehicles manufactured before 1989 i believe.

[brad]

its a seriously easy thing to install and if you get an LED strip on the inside of the window you wont even see it till it lights up. it is an obvious defect for any police to pick up and then go right over the rest of the car. might as well just do it.

BTW it is mandatory on all vehicles, if not fitted as OEM then must be retro-installed, same with left hand side mirrors.

Some locally delivered 80s Ford Lasers never came with left hand side mirrors.

[mooshie]

well i take back what i said, its only mandatory for vehicles manufactured after oct '91- http://www.comlaw.gov.au/Details/F2009C00579

so what is the manufacture month date on your car given it is a '91?

if it is pre legistlation you could always just print out the details of the link i posted and argue the point with the police officer who pulls you over as they have a limited understanding of the ADRs at best, or you could just install the light! seriously its not that hard a job. Anyway it may actually prevent some numb-nut running up your arse one day.

btw the mirrors are pretty much the same deal. think i got confused as i remember when i was a kid, mum got defected for a blown tail light and so dad installed a second mirror and a high mount light at the same time and then got it cleared at the local cop shop. this was in a '79 Mazda 323 and would have happend in the late '80s/early '90s. they started phasing those laws in from '88 so grifty was right. guess dad was just being proactive, either that or the cop gave him a bum steer!

[pat88c]

well i take back what i said, its only mandatory for vehicles manufactured after oct '91- http://www.comlaw.gov.au/Details/F2009C00579

so what is the manufacture month date on your car given it is a '91?

if it is pre legistlation you could always just print out the details of the link i posted and argue the point with the police officer who pulls you over as they have a limited understanding of the ADRs at best, or you could just install the light! seriously its not that hard a job. Anyway it may actually prevent some numb-nut running up your arse one day.

btw the mirrors are pretty much the same deal. think i got confused as i remember when i was a kid, mum got defected for a blown tail light and so dad installed a second mirror and a high mount light at the same time and then got it cleared at the local cop shop. this was in a '79 Mazda 323 and would have happend in the late '80s/early '90s. they started phasing those laws in from '88 so grifty was right. guess dad was just being proactive, either that or the cop gave him a bum steer!

Great Advice mooshie


I think from my understanding if the vehicle was fitted with a third brake and you remove the taillight you are not con applying to the ADR's


The Idea of the LED strip is great idea and will cost you almost nothing
Best go Jaycar and ask them what best way to do it

[Pepsinator]

wheels still not here
but hopefully tomorrow

my mate did my red stripe for me
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/564193_191665670952937_100003285163185_304730_2320 93266_n.jpg

[EKVTIR-T]

Not a bad effort,if a little thick.

Should look better with new wheels and low :thumbsup:

[markismaximus]

Best go Jaycar and ask them what best way to do it

getting something from jaycar will be as bad as not having anything at all. You can't just make a brake light with LEDs.... all lighting on vehicles need to meet ADRs. So unless the homemade LED brake light is tested, and approved, don't try make one.

You'd be better off getting an off the shelf, LED brake light from a company like hella or Narva.

like one of these http://www.narva.com.au/sitebuilder/products/medium/662/84670.png

see here

http://www.narva.com.au/products/browse/eye-level-brake-2


On another note, can't believe how clean this thing is.... take care of it bud

[Pepsinator]

i got this one

http://www.narva.com.au/sitebuilder/products/small/813/84650.png

now to get the wing painted!!!!!! sucks i have to travel more than 30kms for it :/

[Pepsinator]

its red vinyl :)

[Pepsinator]

http://img827.imageshack.us/img827/7010/20120421002133.jpg
NUTS YO
NOW WHERE THE **** ARE MY WHEELS D:

[Pepsinator]

ALL DAH BABIES (BORAT)

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/p480x480/522615_199046770214827_100003285163185_320353_5173 92495_n.jpg

[EKVTIR-T]

Although I dont approve of replicas they will look good :)

[iceey]

good job with the build =] nearly there

[hitoriko]

those wheels do look very nice! - where did you get them and how much did they set you back?

[Pepsinator]

i got them through a friend of mines business
they cost me $850

wheels on
and wrapped in Pirelli P7 195/45/15
now to get wing painted&fitted
then maybe lower shocks and springs later down the track :)
now organizing front and rear EF9 seats :D

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/398201_199659176820253_100003285163185_321847_1710 91755_n.jpg

[EKVTIR-T]

Damn,looks good man. Thats epic high though,lol look at the front gap!

cant wait till its lowered

[Pepsinator]

yeah ahaha
massive wheel gap
but still looks awesome in real life! :P
got looks and a thumbs up already XD

[brad]

Looks the goods! Get my text?

[grifty]

by the looks of it you can fit a can of coke upright in the front wheel arch gap :p

[pat88c]

Oh wow love look with white civic, red strip on the sides and white rims

All that need now is to drop it 30-40mm

[hitoriko]

that looks great! well done

[mooshie]

i got them through a friend of mines business

is that the tyre place on Marion road just south a bit from Cross rd?

lookin the goods!

[Drifter995]

looking good. but it's still "Riiidin' like a fouuuurrr wheeeeeeel driiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ive~" drop it a bit, and it'll look awesome :D

[FAITHLESS]

low low low!!!! looks nice though. i'm trying to find myself a good ed6 for a daily

[Pepsinator]

wing is at the painters!!!!!!
should get it soon

still unsure on suspension!!!!!!!
coilovers or springs and shocks
i want to make my car 100% legal
but im thinking i should atleast get coilovers

[FAITHLESS]

coilovers are lots of fun :)

[90civicGL]

If I have the money I'd get some koni yellow shocks with some ground control coil overs, but I cheaped out and got tokico blue shocks and stock 4x4 springs :P

[mooshie]

coilovers wont be properly legal in SA unless you weld\modify them to not go any lower than legal height for the EK measured from the top of the wheel arches to the centre of the wheel. Regency should be able to tell you the exact height.

[hitoriko]

http://www.ebay.com.au/itm/190664610053?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Im considering these for my crx - they have been getting good reviews from MX5, MazdaMPS, BMW, Merc and Lexus forums.

[Pepsinator]

they seem to be good for track work man
alot of adjustments
im still unsure but i think once my wing is on
then ill want to dump it

[nzjdm]

Sweet work man loving the ED! hey where did you get your j's rear wing from? i want for mine!!

[Pepsinator]

EF9 seats are at my local depot
cant wait till tomorrow :D

also coilovers have been ordered!

[EKVTIR-T]

also coilovers have been ordered! :3
Which ones did you go for?

[FAITHLESS]

Man I love how excited you are by everything :)

[EKVTIR-T]

Man I love how excited you are by everything :)
COILOVERRRSSSSSS!!!!
http://i766.photobucket.com/albums/xx305/pikasafire/GIFS/awwwwyeah.gif

[FAITHLESS]

coiloverrrssssss!!!!
http://i766.photobucket.com/albums/xx305/pikasafire/gifs/awwwwyeah.gif
hahahaha

[Pepsinator]

COILOVERRRSSSSSS!!!!
http://i766.photobucket.com/albums/xx305/pikasafire/GIFS/awwwwyeah.gif
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAHAHAHAHAHAHA


Which ones did you go for?
i went for GAB HA coils

[nelsonthen]

realllyyy..... nice job

[Pepsinator]

AWWW SHEEEETTTTTTTT
EF9 seats waddup yo!!!!!
man these are awesome
so fresh!!! http://www.dopegirlfreshattire.com/blog/wp-content/uploads/2011/05/Will-Smith-Fresh-Prince-1.jpg

http://img526.imageshack.us/img526/7420/20120511154816.jpg
they're in MINT condition!!!
such a bargain aswell!!!!

sadly, as they were shipped this happened
:/
http://img6.imageshack.us/img6/9743/20120511155751.jpg

also just a note for people with eds n such
ef9 passenger seat left rail
needs to be swapped with stock rail

left is ef9 right is ed6
http://img834.imageshack.us/img834/263/20120511155739.jpg

WANT COILOVERS NOW NOWNWONWOWNWW

[Pepsinator]

also got a black spoon Duracon off my mate !!
car is coming along nicely
now just for coils!

[FAITHLESS]

I like your updates.
Keep the coming!!!

[CivicEGSI]

Needs moar lowsssssssssssssss

[markismaximus]

sadly, as they were shipped this happened
:/
http://img6.imageshack.us/img6/9743/20120511155751.jpg


this is easy to fix. remove that bracket and the cover on the other side and take that broken cable out. grab the one off your other seat and done. mine was broken when I first got it

[Pepsinator]

Hey guys
sadly...

EOI on the civic

[mooshie]

What? Why? (how, where, when etc etc)

[Pepsinator]

found another car i want

[markismaximus]

wow, that didn't last long

[EKVTIR-T]

Yeah,you used to be cool

[FAITHLESS]

What car you getting?

[mooshie]

Geez that was quick. Only saw it on Gumtree last night!

[Pepsinator]

Yeah,you used to be cool

dont worry
i will still be cool ;)
just you wait :)

[mrwho]

White DC5R?

[Pepsinator]

White DC5R?
nope :D

[mooshie]

Does it have a sunroof?

[Pepsinator]

well things didnt go as planned
EF is staying in my hands
wing being fitted tomorrow

[Bludger]

too late, we have lost faith in you, you don't deserve an EF.

[EKVTIR-T]

well things didnt go as planned
EF is staying in my hands
wing being fitted tomorrow


too late, we have lost faith in you, you don't deserve an EF.

http://i684.photobucket.com/albums/vv204/Wishes4you2/outsider.jpg

[FAITHLESS]

well things didnt go as planned
EF is staying in my hands
wing being fitted tomorrow

chin up man.

look forward to photos of new wing!

[Bludger]

chin up man.

look forward to photos of new wing!
he should buy an ED.

sell the Ef to a hardcore EF fan that will treat it right.

[Pepsinator]

too late, we have lost faith in you, you don't deserve an EF.

its an ed ahah

[Pepsinator]

i take pride in my civic
always clean and i vacuum her each week :)

[Bludger]

its an ed ahah
well fuk me.

I'm a wanker.

[NeedVtec]

well fuk me.

I'm a wanker.

i agry justin bieber.

[EKVTIR-T]

Do you rage at your girlfriend and wanna break up,then once you calm down say youre sorry and you love her ;)


You were so quick to dump the ED so we feel youre not a true oldskool enthusiast

[Pepsinator]

Do you rage at your girlfriend and wanna break up,then once you calm down say youre sorry and you love her ;)


You were so quick to dump the ED so we feel youre not a true oldskool enthusiast
i really have no idea what came over me
i guess its because the car i was looking at had vtec

[xtnsevolution]

You dont live down south by any chance do you? I keep seeing an ED6 like this in the flagstaff hill area.
Car looks awesome mate.

Christian