PDA

View Full Version : B18c7 Eg swap problem..


sdewyz
15-03-2012, 09:31 PM
Hey folks so im putting a b18c7 into a eg civic.

Problem 1. There are a few hoses conning from the inlet manifold. Which of these can I delete and sent important ?? Are these just Emissions hoses or??
http://img.tapatalk.com/7a6aa9a4-24f3-5437.jpg


And problem is the power steering set up is not bolting up?? Seems the powersteering hoses from my eg have differant fittings. The car had a b18c2 I'n there before my swap so yeah I can't figure out why the difference? Any suggestions?

Solution. Iv found a dc2 type r air con hose. From what iv herd this will solve my problem?
mocchi
15-03-2012, 09:35 PM
you need ps pump from obd1 96-97 dc integra

or

drop your subframe and change all ps lines from the dc2 to your eg
sdewyz
15-03-2012, 09:52 PM
Ok so differant ps pump? So my choices ate change the pump or replace whore ps rack ect??
mocchi
15-03-2012, 09:54 PM
Ok so differant ps pump? So my choices ate change the pump or replace whore ps rack ect??

buy the pump from wreckers $100
saves you time and hassle

goodluck
mytfoz
15-03-2012, 09:58 PM
PS hose from pump is different.
u cant use the eg on as the connector end of ps pump is bent differently compared to the ITR ones.
im using a PS hose from a 97 JDM Integra Type R for my b18c.
as EG one was very tight fit.
Glocker
16-03-2012, 02:25 AM
Change the type R steering rack over while you're putting the engine in and problem's fixed. It's much nicer anywa.
ECU-MAN
16-03-2012, 09:31 AM
you can change the power steering high pressure hose from the DC2R to fix the problem
XB-16-AX
16-03-2012, 12:20 PM
be sure to flush out old PS fluid and put in a fresh PS Fluid.
sdewyz
16-03-2012, 09:36 PM
Ok so a dc2r high preasure hose should set me strait??
mocchi
16-03-2012, 10:06 PM
lol grotty finger you dirty kunt!

that hose is for charcoal canister purge solenoid valve, wheres the valve?
http://www.ozhonda.com/forum/showthread.php?152897-B18C7-What-is-this-and-what-does-it-do

great tip for you: download service manual for the integra.
if you find any issues like this, its alot quicker to check on service manual
having this kinda habit will make you know more about things the correct way.
quicker than waiting to get answers from forums, quicker than searching forums and you know its what honda says.

i wish you luck.


regards,

sean