130 kw b16a

[delsol9000rpms]

would these make any difference to my car or is it all bullshit
http://www.ebay.com.au/itm/260396906077?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[Lukey]

MSD dizzys are good. but where did u pull 130kw from?

is that what ur engine makes now?

[delsol9000rpms]

130kw at the wheels standard bottom end loll i pulled it off do u reckon that kit would make any difference? or is it a waiste of money

[Lukey]

not entirely sure if it would. oem honda ignition systems are usually good

[gen2 CRX]

give it a try.

[delsol9000rpms]

im going in 1 week for a retune im trying to squueze any extra power i can out so imm just seeing what i can experiment with what u reckon

[Bludger]

wouldn't do it unless I was on boost.

[delsol9000rpms]

well see how i go i guess

[Emnesty]

Imo..

If u have aftermarket cams, adj cam gears and ur cam gears are tuned then it would def help by installed the MSD kit.

Would also benefit for future plans should u wish to boost her up!

I had similar setup on my old Dseries.. But i was using Accel CDI.. With a modified dizzy cap. Ignition was much smoother and proven power.

Air/fuel/ignition + tune = Powaaaaa!!

[GSi_PSi]

If your after upgrading your ignition system then this would be your best choice

http://www.jhpusa.com/store/pc/viewPrd.asp?idproduct=8654&idcategory=23

In terms of gaining power, no you probably wont be gaining anything unless your dizzy is deteriating...

130kw B16a would be nice.... but how is the torque ?

[delsol9000rpms]

yh the torque is pretty good for a b16a adrian from toda said it was pretty impressive for a standard bottom end b16a but im just trying to do little stuff now that will make the car go a little better

[GSi_PSi]

Is this the same B16a that had a run with my B20 DC2 a few years back lol?


130kw is fairly good bro, i dont think there is much more you can do in regards to getting any more peak power out of it....
Im guessing its got the Toda Spec C's with ported head and standard B16a bottom.. what is your complete list of mods
how does the dyno graph look like if you dont mind posting ?

[delsol9000rpms]

haha nah i didnt run with ur b20 i have only owned the car since august.
its got: toda spec cs
ported head with 5 angle valve job
plm bisimoto replica headers
edelbrock performer x manifold
custom cold air intake
gearbox stdard b16a box with 4.9 final drive, lsd
thats about it i guess

[GSi_PSi]

pretty sure the old owner did, i think his name was charlie?... black delsol.... creme leather seats.

[delsol9000rpms]

nah man i bought the car standard this isnt my account its my cousin he dont use it anymore so i use it haha i only did my work last december

[delsol9000rpms]

and btw its not a del sol my car its an ek4

[GSi_PSi]

ohhk i see was getting confused.. so this is an new motor build, im guessing adrian did the work?
have you ran it down the 1/4 at all?

[delsol9000rpms]

nah my cousin did the work but adrian tuned it for me nah i havent took it yet im chaning my headers and a few things around this week then im taking it for retune and i will run it. did u race my cuzins crx who won lol?

[GSi_PSi]

lol it was quite even... had no space in our private track to go past 3rd gear...... my car had no tune on it though was freshly built
very quick for a b16a i must say

[jdm18c]

Charbels car was a weapon crx.. Sounded like a airoplane on vtec yoooo

[simmy]

have you had a go against my d15b?

you wouldnt understand..

[Emnesty]

have you had a go against my d15b?

you wouldnt understand..

D15??

Wow ive seen one shit on a vtir dc2 .. Mayb driver was shit.. Lol