Buddy club 17" or 16"

[lerroy]

Guys
Moving away from the show car bling
Trying to be JDM ahah

What do you reckon Buddy club P1 Racing wheel

16" Charcol

or 17" Bronze/gold

Reson being there cheap for a jap wheel

any one have opinon i really like the gold colour wish it was in 16", I just want a better ride that what the 18" are giving me


thanks

[Hondavirgin]

I'd go 16" charcoal, saw a white Type R with 16" charcoal and it looked pretty mean.

I've got 16" white myself, but then, i've got a blue car, loving the P1s, they're a classic wheel!

[lerroy]

Cool yeah can get the 16" for like $1350 thought that was pretty good and 17" Gold for like $1450

u using the 35 Offset ones ?
hmm decision decisions

[Q_ball]

i say drop ya car on spinning 24 inch, pink rimms!!
hot man, hot! lol :thumbdwn: :p

[LO_N_SXC]

If you're planing to lower the car by heapps then go for the 17's my mate did that on his Bomex kited DC2 and it looked hot! 16's would just look too small and not only that the car would be too low, thats if you're dumping it! I had the same problem so I bought a set of 18's that are now for Sale!

Check sign ----->

[lerroy]

If you're planing to lower the car by heapps then go for the 17's my mate did that on his Bomex kited DC2 and it looked hot! 16's would just look too small and not only that the car would be too low, thats if you're dumping it! I had the same problem so I bought a set of 18's that are now for Sale!

Check sign ----->

Car is Dropped already running on 18" with rolled guards
Just wanted better performance as the 18"s are like anchors

But yeah no doubt the 17s Would look better hmmm choices

[LAGOOT]

id say 16" but in bronze :thumbsup:

[Q_ball]

IMO 17s are the go...u cant go from 18s, to 16s...its too much of a drop.
17s will giv u a mad look to the car and also giv u good performance cause of their weight...
u get the best of both worlds with 17s

[LO_N_SXC]

IMO 17s are the go...u cant go from 18s, to 16s...its too much of a drop.
17s will giv u a mad look to the car and also giv u good performance cause of their weight...
u get the best of both worlds with 17s
I'm with him! stick to the 17's all da way...

BTW: do you know where you are getting this wheels from?

[CJL]

Go with the 17" unless u wanna keep the cost of tires down, there for go 16"

[lerroy]

Im getting them from

www.modyourcar.com.au (http://www.modyourcar.com.au/)

Dan Rucci Top Guy

Anyway yeah thanks for the input im guessing the 17" Hmmmmm i remember when i told ppl about my 18's, they were like whooooo to big get 15"s 16"s
17"s would still be a JDM car right ??? (im such a loser ahahah) shhh

[LO_N_SXC]

Im getting them from

www.modyourcar.com.au (http://www.modyourcar.com.au/)

Dan Rucci Top Guy

Anyway yeah thanks for the input im guessing the 17" Hmmmmm i remember when i told ppl about my 18's, they were like whooooo to big get 15"s 16"s
17"s would still be a JDM car right ??? (im such a loser ahahah) shhh
Dan Rucci? is that guy by any chance the owner of a wide body Red Corolla? I have seen his car in a few mags and my cuz Is building something along those lines, without the wide body but still retaining the Supercharged engine!

BTW: sorry for going a bit off topic! lolz :o

[lerroy]

Yeah thats right
ROLLASX its a nice wide body shiney corrolla :P

hes working on it now about to re releaase it i think

[LO_N_SXC]

Oh wait till I tell ma cuz He loved that car! it pretty much inspired him to do his own up.

Has he mentioned what he has done to it? or when he will let the beast unleash?

[lerroy]

No idea as of yet
Hes been working very hard getting the online shop up to and online and his other project car lexus..

i cant wait to see it i think its gonna be a show stopper when he lets it loose he siad major changes and new ideas

[lerroy]

Guys if im gonna go 17"

Integra Vtir is 4 Stub 100
what offset ? 25,35 or 43 ??

thanks

[LO_N_SXC]

Guys if im gonna go 17"

Integra Vtir is 4 Stub 100
what offset ? 25,35 or 43 ??

thanks
If your wheels that you have at the moment don't rub? then go for the same offset as those, you can find that out at the back of the wheel.

[lerroy]

hmmm well they do and the width will be different though from 7.5 to 7.0
kinda wanted to stop the rub on the inner guard

[LO_N_SXC]

hmmm well they do and the width will be different though from 7.5 to 7.0
kinda wanted to stop the rub on the inner guard
One thing I have learnt is that I used to have 215/35 Falkens on the front and they never Rub when on full lock, Last weekedn I got ma self a new pair of tyre on the front coz the Falkens where almost like semi slicks! LOL but now with the new tyre (Nankang) they rub and they are also 215/35's It dont make sence????? all I'm saying is have a good look at the Tyres, coz like in my case the Nankangs are a bit too squared compared to the Falkens I had before! maybe thats why they Rub??? they seem to be much quieter than the Falkens.

[lerroy]

Yeah there not that bad like only rub when its full lock and on the inside its not a big issue

thing that annoys me is holes in the road and the rough ride i wanna get past that
but if i go the 17" route i dont think thats gonna change :(

[ONV73C]

It's still gonna be a rough ride on 17's...

I'd go 16's if you're main goal is improved ride quality.

Im considering doing the same myself at the moment (17 down to a 16)

[industrie]

for looks go for 17's..performance wise..16's are the best for honda..thats the real JDM look..tough mean look..

[LO_N_SXC]

for looks go for 17's..performance wise..16's are the best for honda..thats the real JDM look..tough mean look..
One inch ain't gonna make much difference! you would notice it more if you where to go from lets say a set of 18's down to a set of 15's then you would notice! I know so coz I have done it to mine and you can feel the difference, I just don't ride on my old set of 15's coz my car would be lower than it is, at the moment it is still too low! by 10mm though.......

[lerroy]

Yeah ok i know what you guys mean.....

Yeah 16 would be good just gotta find some cheaper racing lightweight wheels that are gold really want gold...


or gunmetal may be the go
far out im so indecisive

does anyone have a set of p1's to show off ?>?????