Finally getting around to introducing myself.

[bronson11]

Hey,

Since I bought my second Honda car, i thought I'd finally introduce myself to the OZHONDA crew!! Was a fairly regular member of prelude australia from 08'-10'.

I previously owned a 94' Honda Prelude Si 4WS. Which was unfortunately written off with the christmas hail!.

Just bought myself a manual 99' Integra VTI-R from ACT and road tripped back to VIC. Had it for 24 hours and i'm in love!

Current Mods:
- Genuine Mugen Twin Loop catback Exhaust.
- T1R Exhaust Manifold.
- Koni Yellow Sports Suspension. Matched with Integra Type R coil springs.
- Rear swaybar with Beaks subframe reinforcement kit.
- Injen Cold Air Intake System.

Future Mods:
- Type R Brake upgrade (5 Stud Pattern)
- Integra Luxury rims (not a massive fan of the current ones)
- I'm after recommendations for tail lights! haha.

http://i465.photobucket.com/albums/rr19/0m3g4_F4lc0n/20120403_195259.jpg

http://i465.photobucket.com/albums/rr19/0m3g4_F4lc0n/20120403_195614.jpg

http://i465.photobucket.com/albums/rr19/0m3g4_F4lc0n/20120403_195518.jpg

Looking forward to hearing the opinion of the masses!!

[bronson11]

p.s. used the carsales pics as it's dark outside!

[EKVTIR-T]

Welcome dude,good little setup you got going on there,the tail lights looks fine as is :)

Do you have any closeups of those wheels?

[xenonkuraz]

^ like above, tail lights look great already but if you're keen on a change go for the type-r ones

[Bludger]

^ like above, tail lights look great already but if you're keen on a change go for the type-r ones
there is no difference between the type R tail lights and his current ones. exactly the same.

what wheels are integra luxury wheels?

[EKVTIR-T]

Probably DC5 5 spoke

[bronson11]

Do you have any closeups of those wheels?

I'll take some photos tonight!


Probably DC5 5 spoke

Yes the DC5 5 spoke rims.

[bronson11]

Do you have any closeups of those wheels?

http://i465.photobucket.com/albums/rr19/0m3g4_F4lc0n/20120403_195358.jpg

[EKVTIR-T]

Oh thanks for pics. They look cool.

My cousin wanted some white wheels for his civic,will you sell them later?

[CRXDEL501]

Altezza tailigjts ftw

[bronson11]

Oh thanks for pics. They look cool.

My cousin wanted some white wheels for his civic,will you sell them later?

I will be selling those rims, just not exactly sure when!

[GSi_PSi]

sell me those tacky wheels....

[bronson11]

sell me those tacky wheels....

Seems to be a bit of interest in my rims!!

[curtis265]

inb4 welcome abourds

[GSi_PSi]

good luck with ur build mate, keen on your altezza tailights and 17" wheels

[bronson11]

Was able to pick these bad boys up for dirt cheap!!

http://i465.photobucket.com/albums/rr19/0m3g4_F4lc0n/IMG_0861.jpg

[EKVTIR-T]

Nice pick up.So the 5 stud swap is coming soon :)

[bronson11]

In the next few months!! Already bought the back hubs, and will get the front ones soon :D

Next plan is to clean them all up in preparation to put them on the car!!

[bronson11]

It's been a bit quiet on this front for the past few months, but my build has been progressing!!

I've mainly been sourcing parts for my suspension upgrade and saving the cash in order to make it happen.

The list of things i've purchased looks a little like this:

- Acura Fog Lights
- SPC Camber Kit
- Ground Control Coilover for my existing koni yellows
- Decided to replace the old and worn bushes in my car, so i bought a full hardrace kit.
- Finally found a good condition set of rears to compliment my 5 stud conversion.
- DC2R momo Steering wheel
- HEL Braided brake lines
- Slotted Rotors

Things on the wish list:
- UKDM head lights (They are glass, not shitty plastic - Also they have a headlight adjustor switch, so HID's should be technically legal)
- Cruise Control - (I've got most of the pieces just a matter of time)

I'm hoping to install all of this gear i've purchased in october, so we'll see how good it all turns out!!!
I'll keep updating this thread with more photos and info as I go along!!

[bronson11]

http://i465.photobucket.com/albums/rr19/0m3g4_F4lc0n/IMG_1024.jpg

[bronson11]

Seems like i'll be making some time late next month to do the 5-stud swap, and put all the suspension gear in!

I'm starting to get quite excited haha!!! I'll be taking quite a lot of photos for anyone that's interested.

[avanati]

Great job on those calipers... Lota work done there...