euro CL9 cuzco tower bar

[learner]

got the cuzco tower bar for CL9 today... ==not the one for CL7==.
will install it next week.
will post pic later.

saw the manual... no need to remove anything.
shouldnt be a problem to install it

[euro77]

would be good if you can write up on how to install it as well.
where do you get it btw?

[baboo]

I want some lower arm braces...

Cusco do sway bar too?

[learner]

yea... cuzco do have lower arm brace for CL9 as well
is da same price as tower bar...
P.S. lower arm brace is for CL9... not the one for CL7....
the guy said you can't fit the CL7 lower arm brace on CL9.

there also have anti-roll bar for euro... but it cost around AU$800.

i am in overseas at the moment, i got them from overseas.

[cmf]

Wow, good info. How about a rear sway. Do they have one of those available?

[learner]

Wow, good info. How about a rear sway. Do they have one of those available?

sway bar = anti-roll bar = anti-sway bar = lower tie bar = stabilizer bar
http://www.tuninglinx.com/html/a_bars.html
ppls just call it differently

[SSML]

got the cuzco tower bar for CL9 today... ==not the one for CL7==.
will install it next week.
will post pic later.

saw the manual... no need to remove anything.
shouldnt be a problem to install it

The nuts for the strut bolts can be very tight to undo with hand tool.
if u getting the tower bar fitted at shop, maybe ask them not to torque up too tight with air-gun, otherwise v difficult to undo in the future.
If DIY, make sure u hold the deep socket kit down vertically when uturn the rachat, so u dont get force at an angle which can snap the bolt. (that's what happened to me :( )

oh, one stupid Q, Australian accord euro = CL9? then what's CL 7? is it Thai made US version Accord?

[learner]

The nuts for the strut bolts can be very tight to undo with hand tool.
if u getting the tower bar fitted at shop, maybe ask them not to torque up too tight with air-gun, otherwise v difficult to undo in the future.
If DIY, make sure u hold the deep socket kit down vertically when uturn the rachat, so u dont get force at an angle which can snap the bolt. (that's what happened to me :( )

oh, one stupid Q, Australian accord euro = CL9? then what's CL 7? is it Thai made US version Accord?

9999 thx for da info SSML...

CL9 = euro 2.4
CL8 = euro 2.0
CL7 = euro-R
CM2 & CM3 = euro wagon

[learner]

here are some pic of da tower bar

http://www.geocities.com/raverho/ozhonda/TowerBar01.jpg
http://www.geocities.com/raverho/ozhonda/TowerBar02.jpg
http://www.geocities.com/raverho/ozhonda/TowerBar03.jpg

[cmf]

So what is a lower arm or lower arm brace? I got pricing from boomplustoys of 89USD for lower arm, and 179USD for strut tower bar. Still waiting for pricing for rear sway.

[learner]

you can find more info in these thread
http://www.ozhonda.com/forum/showthread.php?t=12548&page=2&pp=12

http://www.ozhonda.com/forum/showthread.php?t=16749

[cmf]

you can find more info in these thread
http://www.ozhonda.com/forum/showthread.php?t=12548&page=2&pp=12

http://www.ozhonda.com/forum/showthread.php?t=16749


Thank you very much. Exactly what I needed to see. :D