How to install harness into Civic EG sedan?

[Glocker]

Hey guys, picked up a bargain FIA 4 point harness, but no idea how to mount it, especially the right side lap belt and the shoulder belts. The seat belt bolt is way too long and I can't find an eye bolt that's just as lengthy. As the for the shoulder belts is it ok just to mount them to the rear seat belt mounting points?

[impossi13le]

i dont believe you can mount the shoulder belts to the rear seat belt moutings. The most common way to mount the shoulder belts is to bolt them to a roll cage, either that or weld (and get engineered) some special seat belt mounting points onto the chassis. Find out with your local traffic authorities, i dont think 4 point belts are legal in street driven cars :S not 100% sure though. take some pictures if you install them :D

[spambam88]

Hey Dude,
For my EG hatch i mounted the front left to seatbelt clip, front right to the rail for the original seat belt.
http://www.costlessbolts.com.au/ went there and purchased 2 eye bolts
and fitted the rear right and rear left to rear right and left passenger seatbelt bolts respectively.
hope it helps
http://www.preludeonline.com/f91/how-install-4-point-harness-100416/

[Glocker]

i dont believe you can mount the shoulder belts to the rear seat belt moutings. The most common way to mount the shoulder belts is to bolt them to a roll cage, either that or weld (and get engineered) some special seat belt mounting points onto the chassis. Find out with your local traffic authorities, i dont think 4 point belts are legal in street driven cars :S not 100% sure though. take some pictures if you install them :D

Another way is to weld reinforced plates and drill holes but I don't wanna do that. I'm only putting the harness when I go to the track, so don't worry. Check my build thread for updates and pics!!


Hey Dude,
For my EG hatch i mounted the front left to seatbelt clip, front right to the rail for the original seat belt.
http://www.costlessbolts.com.au/ went there and purchased 2 eye bolts
and fitted the rear right and rear left to rear right and left passenger seatbelt bolts respectively.
hope it helps
http://www.preludeonline.com/f91/how-install-4-point-harness-100416/

Thanks dude, but still doesn't solve the dilemma, I need much longer bolts for the B-pillar seat belt mounting, at least 2inch long. Am thinking about mounting it to the seat rail's right rear side...wonder if that's load bearing enough...