View Full Version : [CL9] Alternator Output
ChaosMaster
29-04-2012, 08:59 AM
Hey guys, just wondering what the alternator output is for a CL9. I know it was designed to handle having everything on, but with all the stuff I added and am thinking of adding, I question if it'll be enough. E.g Having HID + Fog + upgraded Audio + rear demister + heater etc.
aaronng
29-04-2012, 10:59 AM
Even with just a fully stock car, the headlights dim when the A/C kicks in! So the alternator is just adequate and not really built with contingency for high drain items (like the A/C compressor).
trism
29-04-2012, 11:09 AM
If you put a multimeter across the terminals while the car is running, and all Electrics are off, should measure between 14.3 and 14.6 volts.
Fredoops
29-04-2012, 11:14 AM
2 ways to increase output
1. bigger alternator
2. bigger pully for existing alternator.
or if you're keeping the current setup, to maintain stable current, think about a ground kit and/or volt stablizer.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.