View Full Version : New sparkplugs 3 went back and one went white what the?
Lukezen27
05-03-2005, 01:02 PM
Hi guys
I put in 4 new sparkplugs into my D16Y1 coze I'm using a bit of oil:(
OK three went black in two weeks and one went white in the middle whats this from?
Should they go black that quick?
below is the one that went white
http://www.doubledynasystems.com/spark.gif
PS its stopped using so much oil but still use's a bit
94vtirozguy
05-03-2005, 07:41 PM
they should be all brown
Lukezen27
05-03-2005, 08:45 PM
they should be all brown
Ok the rest are brown/black but why is one white in the middle?
Tho there more black than brown :rolleyes:
Thx Luke
ECU-MAN
06-03-2005, 12:02 AM
maybe your got a bloked injector on that cylinder, running lean on that one cylinder.
Lukezen27
06-03-2005, 08:12 AM
maybe your got a bloked injector on that cylinder, running lean on that one cylinder.
Hi ECU-MAN
Thx for the reply
shuould I try injector cleaner?
Could this allso make the engine burn oli?
Thx LukeZen
ECU-MAN
06-03-2005, 09:11 PM
injector clean is always good
worn rings and valve stem seals cause oil burn
Lukezen27
06-03-2005, 09:22 PM
injector clean is always good
worn rings and valve stem seals cause oil burn
Yeah Im blowign smoke to :(
think my rings are gone :thumbdwn:
Or valve seals are gone, whats the more likey?
The cars only done 98,000K dam it
ECU-MAN
06-03-2005, 09:26 PM
depends when it blows smoke.
under acceleration when you boot it
or
under deceleration and when you 1st start up the car ??
Lukezen27
07-03-2005, 06:28 AM
depends when it blows smoke.
under acceleration when you boot it
or
under deceleration and when you 1st start up the car ??
under acceleration when you boot it but not all the time only sometimes :rolleyes:
ECU-MAN
07-03-2005, 10:54 PM
i would tend to say rings if its blue smoke.
it all depends on engine load.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.