Help with Innovate LM-1 wideband !!!

[integrapwr]

Anyone have any experience with hooking up the Innovate LM-1 wideband to work with Hondata s300?

I have 2 problems:

The auxiliary output cable included with the Innovate LM-1 contains a red, white and un-insulated brown wire.

1)Which wire is used to connect the LM-1 to the ECU Input port (I’m thinking of using ELD D10)?

Also, I tried to match the output voltages in the LM-1 together with the input voltages in the Hondata s300 using the LMConfig315 program but for some reason I cannot get the output values to save properly. It just reverts back to the default values when I reconnect the Lm-1 when using the LogWorks2 program. The voltage values used were 0V to 10AFR and 5V to 20AFR.

2) How do I properly save the output voltage values on the Lm-1 using the LMConfig315 program?

Any help will be greatly appreciated!

[infurNOS]

http://98.158.194.248/showthread.php?p=47262309 may help (honda-tech)

[integrapwr]

Yeah, had a look at that one already and it has not really helped my situation. For some reason the output values still reverts back to the original LM-1 output value. I've tried changing between the red and white output wires to connect to Hondata D10 input port but still no help (I figure the un-insulated brown wire is for ground). This one's got me stumped...

[infurNOS]

Yeah, had a look at that one already and it has not really helped my situation. For some reason the output values still reverts back to the original LM-1 output value. I've tried changing between the red and white output wires to connect to Hondata D10 input port but still no help (I figure the un-insulated brown wire is for ground). This one's got me stumped...

message a user on there 'mtber' he will be able to help if you do not get answers here. He sells and supports ECU/innovative products.

[integrapwr]

Thanks, I'll give it a shot