sensei_
28-05-2012, 04:56 PM
Having just replaced my busted regulator, I've noticed that there is quite a bit of grease on the factory regulator/rails.
However, there is none on the aftermarket regulator. Do i need to grease them? The workshop guy who gave me a hand didnt do it, and i forgot to ask him.
If so, will abit of grease on my finger be sufficient to grease the railings or do i need to remove the whole regulator again and do it properly. I'm not a big fan of pulling door trims as i fear breaking clips.
However, there is none on the aftermarket regulator. Do i need to grease them? The workshop guy who gave me a hand didnt do it, and i forgot to ask him.
If so, will abit of grease on my finger be sufficient to grease the railings or do i need to remove the whole regulator again and do it properly. I'm not a big fan of pulling door trims as i fear breaking clips.