Upper timing cover piece the same for B18/B16?

[Super-DA9]

hi everyone,

just wanna know if anyone has used a B16a upper timing cover piece on a B18C/C2?

I know the lower timing cover is different due to the different deck heights, however I can't find any info on the top piece? need to grab a spare and it would be a lot easier if I can use a B16a one.

any info would be much appreciated.

[Super-DA9]

um... anybody?

[Spunkymonkey]

are you talking about the cam cover?

http://www.weaksauceparts.com/store/images/T/t_17392_01.jpg

[Super-DA9]

lol nah man. the timing cover. y'know, the black plastic cover that covers the timing belt and its components.

due to the B16A and B18C's differences in deck height (or you could say one is a short block and one is a long block) the LOWER timing cover section is different.

however, what I am wanting to know is if the TOP section (square piece more or less) is the same between the two engines?

[mocchi]

different.
did you get it backwards? i think bottom is same, top is different.

[Super-DA9]

different.
did you get it backwards? i think bottom is same, top is different.

thanks for the reply man. hmmm i read that the bottom was different. a few threads on honda tech. its ok though because i picked up a b18 piece anyway

[mocchi]

thanks for the reply man. hmmm i read that the bottom was different. a few threads on honda tech. its ok though because i picked up a b18 piece anyway

oh ok, cos i had b18 and b16
the b18 upper timing cover was damaged and i wanted to swap with the b16 one but it didnt fit.
it was different.

[kraiye]

oh ok, cos i had b18 and b16
the b18 upper timing cover was damaged and i wanted to swap with the b16 one but it didnt fit.
it was different.

have u still got the b16 one? i could use one. the one i made from wafer thin sheet metal is beginning to fall apart ;)

[mocchi]

have u still got the b16 one? i could use one. the one i made from wafer thin sheet metal is beginning to fall apart ;)

dont have it anymore eh