PDA

View Full Version : DIY Diy - spoon duckbill lifter (spacer)



hondaEK4
04-06-2012, 06:52 PM
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Aim: Lift the Duckbill up to get an agressive look
Difficulty: Not very
Required:
-Socket set
-Rubber Door stoppers x2 $0.80cents each or something
-45mm Bolt with M6 Thread $2.50
All can be bought from bunnings for under $5

Depending on how much you want to lift the spoiler, there are different sizes in door stoppers, i went with a 35mm one which will lift it 35mm.
Bolt size depends on the spacer size, it should be at-lease half a cm longer to get it into the thread of the spoiler.

http://t0.gstatic.com/images?q=tbn:ANd9GcSWwUAWGGW0fCyziuXVuQR0JMGKBErD1 lkzcJYgblGmLlqB255NeA doorstop (spacer) they come with a hole already no drilling needed.

http://www.scooterwest.com/file/000/000/000/076/65/LARGE_m6x45b.jpg?1303943497

Only space the 2 rear bolts, you can also get the door stoppers in different colors.

It should come out something like this:
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/c0.0.403.403/p403x403/579570_3357941671730_1364668235_2318856_2134691323 _n.jpg

Thanks for having a read.

connorling
05-06-2012, 01:37 PM
nice idea, can u get a shot looking from the rear straight to it?

instead of door stop, u could cut some fuel hose and washers, it will get the same result i think?

hondaEK4
05-06-2012, 04:41 PM
nice idea, can u get a shot looking from the rear straight to it?

instead of door stop, u could cut some fuel hose and washers, it will get the same result i think?

Yeah, ill get a photo up sometime soon, with the fuel hose they are not really sturdy and will collapse over time and you’d be using a lot of washers to get a noticeable lift in the spoiler. I went with the stopper cause its solid rubber and rubber has flexibility.

ericl33
05-06-2012, 04:57 PM
best DIY.....

very detailed.

very useful

androo
05-06-2012, 05:59 PM
best DIY.....

very detailed.

very useful

Agreed... Great idea, but too detailed.

Tosies
05-06-2012, 06:01 PM
i thought this DIY was already up by someone else

unl3a5h
05-06-2012, 06:05 PM
best DIY.....

very detailed.

very useful

LMFAO was thinking the same thing, this thread is like a recipe book with pictures of finished dishes and a list of ingredients.

Boznian
10-06-2012, 04:09 AM
It needs more... photos..

votek
10-06-2012, 06:34 PM
still no photos or more information

MIKO_OL
17-06-2012, 03:10 PM
Interesting using door stoppers wouldn't have thought of that. Would have thought you would have done the same as Viinh in the EG with teh spacers but suprising how that works. Good job !

EK1_
09-08-2012, 05:11 PM
Could this also be done to lift any wing?

FRK202
18-08-2012, 07:03 PM
Just wondering, how did you remove the old bolts and install the new M6 bolts under the spoiler? I can't seem to take out the bolts.

Cheers