oil beather b series

[na-118]

hi there,

i have noticed a line coming from part of the pcv system to my oil breather.
the square black box on the back of b series motor under the manifold.

i was wondering it it is possible to remove/ block that top bit off and run

x2 -10an fitting from valve cover
and x2 -10an fitting from back of the block,

is that possible thankyou

http://img338.imageshack.us/img338/545/13sr201e0801.png (http://imageshack.us/photo/my-images/338/13sr201e0801.png/)

[ericl33]

tao nghi khong sao dau.

chac chan ok.

[Alexplicit]

http://honda-tech.com/showthread.php?t=2630392

that could possible help

[na-118]

hmm,, so it looks like i will be able to delete the OEM catch can, block it off, and run my setup , any other guys out there with inputs etc

thanks

[SLOBRO]

yer you can buy special fittings for the back of the block and run it to ur catch can
BYP have them

[na-118]

yeah, i will be betting them to run -10an fittings, but need to confirm 100% whether that black box can be deleted

[Alexplicit]

the black box is just a factory oil catch can, from a quick read you need one of these http://www.brfittings.com/index.php?route=product/product&product_id=54 and then just run your own catch can.

from my understanding i still think you will need to run a catch can, because other wise you will blow all your seals.

[mocchi]

the black box is just a factory oil catch can, from a quick read you need one of these http://www.brfittings.com/index.php?route=product/product&product_id=54 and then just run your own catch can.

from my understanding i still think you will need to run a catch can, because other wise you will blow all your seals.

its the pcv, not the catch can

[GSi_PSi]

khood

http://www.ozhonda.com/forum/showthread.php?145580-Installing-a-Breather-KIT-onto-a-B20VTEC-LSVTEC

[na-118]

its the pcv, not the catch can

So am I able to delete this 'pcv' and run my catch can setup?