Water/Oil Gauge Sensor location??

[Spoon-Accord]

HEY GUYS..

installing my gauges.. came to realise.. where the hell is the sensor for water temp or oil temp on a H22a or any honda engine??

HELP NEEDED!!

Kenny :P

[CTR Coupe]

you cant use the standard sensors you have to use the sensors that came with your gauges. i put my temp sensor in the metal housing(drilled a hole and threaded it) it's connected to the block on the top radator hose. and i used a T-piece for the standard oil pressure sensor and connected my autometer sensor to the T-Piece. i assume you put the oil temp sensor in the oil pan??

[ECU-MAN]

typicly the temp guage sender is on the distributor side of the head, under the dizzy

[wynode]

http://www.ozhonda.com/gallery/data/509/3IMG_4399-med.jpg

[Spoon-Accord]

i tried that.. i unplug the three plugs from the sensors..

turn the car on.. the temp gauge on dash still went up normal
lolz

losted!!

Kenny

[PhatSol]

The temp gauge sensor is the thin sensor (1/8" PT thread) with only a single wire connection. Not sure where it is on a H22A though sorry. But it's under the VTEC solenoid on a B16A ;)

[Spoon-Accord]

so its the one with a single wire??
wat color is the wire.. on one of mine.. its the green one i think

Kenny

[wynode]

There are around 2-3 water temp sensors I believe :)

[Spoon-Accord]

yep sure is wyn..

thing is.. i dunno which one i can use for the water/temp gauges

[ECU-MAN]

yes its the single wire one.

the two wire one in the pic is the ECT