Launch control D16Y1

[mark2001311]

Hey all, I'm after a launch control for my D16Y1 Engine with a D15B7 ECU, any members on here that can flash my ecu or install one of these chips?

http://tinyurl.com/7m9y9ht

I'm a bit lost, if you could point me in the right direction, it would be appreciated.

[ECU-MAN]

First of all you need to get your ECU modiffied to accept a Chip, this is called socketing the ECU.

You can then run any chip you choose. If you want to run launch control you must install a clutch switch and wire it to the correct pin on the ECU.

caution:
If you put a Chip in that does not match your engine, you can damage your engine and/or you will possibly have problems with the way the engine runs.


I can socket your ECU for you if required. PM me for more details.

[markismaximus]

hold up, you are running a vtec engine with a non-vtec ecu. whats the point of that. may as well stick with the D15B7 then....