PDA

View Full Version : DRL wiring help needed on FD or 2007 civic Please.



mat1975desi
13-07-2012, 09:23 AM
Hi Senior members

This is my first mod and wanted to install one of those LED small 5 cm strips as DRL. Wanted to know which under hood fuse to use so that DRL come on only when ignition key is turned to ACC or engine on? THese lights i bought from melbourne brightautolights, they are awesome and also u can connect one wire to the low beam wire which makes the DRl turn off when the headlights are turned on at night. So no more blinding other people.

I do not want to drill holes or gothrough firewall? as was mentioned when i searched for passing wire to the interior fuse box, as there is fuse # 37 which is DRl, it does light up the lights when i ran a wire from the lights but outside the car :(
ANy help is much appreciated.

curtis265
13-07-2012, 10:37 AM
fuse 37 is connected to nothing.

the DRL circuit doesn't exist in our models

mat1975desi
14-07-2012, 10:33 AM
Hi Curtis 265

Thansk for ur reply mate. When i inserted the DRL wire into the empty fuse 37 slot, and then i turned the key to acc or started it ,the DRL light slit up. thats what happened.i know its not connected to anything, but i want to use the fuse 37 space for the DRL wire instead of tapping other fuses.
My question is How to run the wire from engine bay to the interior fuse box? ????????????? Any ideas?
Thanks

curtis265
17-07-2012, 07:43 PM
you can get a thing called "add a circuit"
http://www.allfordmustangs.com/forums/attachments/2005-2010-mustang-gt-tech/153875d1334644828-tripod-dash-gauge-install-add-circuit.jpg