B18B Engine Mounts.

[Adzzz]

For the engine mounts i noticed there is a nut on the end. Can i just un do that nut and remove the rubber or will i have to remove the whole arm as well. Just want to make sure before getting into it and finding im screwed.

Cheers

[gbpracing]

For the engine mounts i noticed there is a nut on the end. Can i just un do that nut and remove the rubber or will i have to remove the whole arm as well. Just want to make sure before getting into it and finding im screwed.


Cheers
Which side are you talking about drivers side, passenger side or rear ?
The mount is bolted to the engine first and slips into a mount cradle on the chassis and the single bolt slides in once the holes are lined up. So when you remove that bolt the engine could shift so make sure you support the engine from underneath. The mount then can be unbolted from the engine side and then you will have the mount in your hand. Check out B18A engine mounts on the internet and you will see what I mean.
http://img65.imageshack.us/img65/4058/mountzq9.jpg
Cheers

[Adzzz]

It's bot the passenger side and drivers side front mounts. So all i need to to is support the engine take off that nut un bolt the mount slide the new mount on, bolt the mount of and do up that bolt on the arm connected to the gear box?