Log in

View Full Version : CRX running gear/fuel system/wiring etc into ED civic



canadian
31-08-2012, 12:05 AM
Has anyone done a full swap of all the mechanicals of a crx si into an ed6 civic?

I am imagining this to be the most comprehensive way to do a carb-fi swap in order to make it the most oem you could without actually buying an fi civic. Basically everything from the crx swapped into the ed shell.

Thanks.

Renaissance_x
02-09-2012, 03:34 AM
It has been done before. Jdm ef civic si's actually come with this engine.

ouch
29-04-2013, 08:01 PM
anyone done this and can expand on it?

markismaximus
29-04-2013, 08:19 PM
it would literally be unbolting everything from CRX and bolt into ED6. done

gen2 CRX
29-04-2013, 10:09 PM
Its a straight bolt on all mechanical parts are interchangeable

Baby Face
03-05-2013, 09:59 PM
Straight swap, everything from EF8 into the EF civic chassis, probably should move the brakes accross too.

if the civic is not FI would u be able to take the fuel return from the EF8?

pat88c
04-05-2013, 12:30 AM
it straight swap if you doing D series Jdm crx ef7 or adm ed9
But using a jdm crx ef8 or jdm ef9 civic with b series you will need hasport cable B series mounts and new clutch cable

I keep to ed9 as cheap swap for DOHC d series swap but if you got some more cash do b series swap using a Dc2r B18c7 or B18cr

Good luck

Baby Face
04-05-2013, 08:15 PM
theres a ef Civic B18C that pwns a gtr35 on the track, somewhere in japan. okinawa JDM

edit
i think it was okinawa but then there are many prefectures.