PDA

View Full Version : 2006 Hond Accord Euro CL9 interior light problem. PLEASE HELP!!


xolent
04-09-2012, 11:47 PM
Hi Guys,

Over the weekdend i managed to blow a fuse/relay/module in my 2006 honda accord euro.
I've checked all the fuses from the drivers side kick panel to the engine bay and no fuses appear to be blown.

The problem i'm having is that the interior light does't come on when i unlock the car, nor does it even come on when i open the door however if the light is switched on manually it works but NOT if it's in the middle position which is auto.
Can anyone tell me if theres an auto dimmer module/relay which i can check..?
Please help me as i'm all out of ideas.

cheers.
jordiiisme
05-09-2012, 12:09 AM
I've been having exactly the same problem for a while now and havent really gotten around to fix it. I made a thread a while ago so maybe there might be some ideas in these you can try.
http://www.ozhonda.com/forum/showthread.php?150719-CL9-Problem-with-interior-dome-light

However, when the tab is on auto function, there is a tiny little bit of light still coming through.

If you happen to find a solution, please share!
xolent
05-09-2012, 09:18 AM
I've been having exactly the same problem for a while now and havent really gotten around to fix it. I made a thread a while ago so maybe there might be some ideas in these you can try.
http://www.ozhonda.com/forum/showthread.php?150719-CL9-Problem-with-interior-dome-light

However, when the tab is on auto function, there is a tiny little bit of light still coming through.



If you happen to find a solution, please share!

Okay, do you know where the auto dimmer sending unit is on the car ??
jordiiisme
05-09-2012, 06:39 PM
no i dont sorry but you might get a better response posting in the accord euro part of the forum.
xolent
11-09-2012, 10:55 PM
no i dont sorry but you might get a better response posting in the accord euro part of the forum.

Fault found, problem solved!
jordiiisme
12-09-2012, 09:13 AM
what was the problem? how did you fix it?
xolent
15-09-2012, 06:49 PM
what was the problem? how did you fix it?

I ran all the wiring back to the fuse box underneath the dash on the drivers side.
I then Replaced the fuse box and clear all the codes after I installed it. Remember to unhock the battery if your gonna do it.