indo_Mi
11-09-2012, 12:57 PM
Hi all
I have a Honda City GA2 (carbie model)
And I also have a B16a2 (from a LS teg) to put in it.
Now i understand this is going to be difficult because:
1. its bigger then a D-series and the stock 1.3 motor
2. the car is a carbie. (a basic system isn't expensive, filt pump, swirl pot, pumps etc.)
I've seen someone use an ED gearbox, so im guessing a B-series box may not fit?
:confused:
Now i'm no mechanic, just a weekend DIY'er. but i understand how most things work...as i have swaped a couple Rwd engines, and removed a couple fwd motors but trying to put the B16 into the city is almost a joke but not impossible.
I've been trying to find any info on similar and/or same swaps to no avail.
So what do i need and what do i need to do to get this happening?
any help would be great.
regards
Ade Mc
I have a Honda City GA2 (carbie model)
And I also have a B16a2 (from a LS teg) to put in it.
Now i understand this is going to be difficult because:
1. its bigger then a D-series and the stock 1.3 motor
2. the car is a carbie. (a basic system isn't expensive, filt pump, swirl pot, pumps etc.)
I've seen someone use an ED gearbox, so im guessing a B-series box may not fit?
:confused:
Now i'm no mechanic, just a weekend DIY'er. but i understand how most things work...as i have swaped a couple Rwd engines, and removed a couple fwd motors but trying to put the B16 into the city is almost a joke but not impossible.
I've been trying to find any info on similar and/or same swaps to no avail.
So what do i need and what do i need to do to get this happening?
any help would be great.
regards
Ade Mc