View Full Version : clutch to start
nicholas R
24-09-2012, 09:19 AM
hey had my ep3 r for a month now. having to hold down the clutch to start the car is getting a little annoying. is it necessary? if not does anyone know how to get this removed?
curtis265
24-09-2012, 09:30 AM
it's a safety features, and like all safety features it can be a little troublesome
if you bash your ca r's front end into an object because you disable it, you're ruining your chances of getting an insurance payout
anyway you need to go under and fool the switch into thinking the clutch is depressed. It might muck around with cruise control (if the ep3 has it..)
try this http://www.8thcivic.com/forums/electrical/160028-diy-jumper-your-clutch.html
lolmclol
24-09-2012, 02:42 PM
if you bash your ca r's front end into an object because you disable it
"Car: : DC2R crashed :("
Spidey senses are tingling.
nicholas R
24-09-2012, 09:52 PM
thanks mate.!
dorikin
24-09-2012, 09:56 PM
lol
not sure exactly how the the system works but check under clutch pedal to see if there's a switch that gets pushed
bennjamin
25-09-2012, 07:16 AM
lol
not sure exactly how the the system works but check under clutch pedal to see if there's a switch that gets pushed
There is a clutch switch
Just short the loom side with a wire or paper clip to bypass.
I took the actual clip off with sensor - and soldered the wire to short. Clean and won't fall out !
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.