View Full Version : Need Help :(
hey guys/girls i installed my sri yesterday and found out that i had a cable connecting to the old intake that i couldn't plug into the new sri. i just need to know is it ok to drive with out the cable attached? the other side of the cable went next to the engine oil cap, i had to buy a mini air filter to cover it. can anyone tell me if its bad to drive with the cables not plugged in etc? i added in some photos to help :)
eLtrix
25-09-2012, 10:16 AM
What a cute mini pop filter. I'm no expert but I am pretty sure you don't "HAVE" to. But its best that you should i guess?
dougie_504
25-09-2012, 10:48 AM
I think it's the breather that vents gas out and back into the intake. Don't need it. Just push it away and point it down because it may spit out a little bit of brown gas/droplets
hmetro24
25-09-2012, 11:31 PM
U have installed a small filter to the valve cover. u can connect the small cooling hose straight with out using the hard line.
xenonkuraz
26-09-2012, 01:36 AM
Not good in the long run to have a breather running off the valve cover.
Hook it up to a catch can or plumb it back into the intake.
BTW its not a 'cable' but a 'breather line' or 'hose'
GU357
26-09-2012, 08:32 PM
You should connect it. as a legality its meant to vent back into air intake and be reconsumed by the engine.
So you do "have" to, just like you "have" to have a enclosed/secured pod.
its just the law.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.