PDA

View Full Version : [CL9] & [CU2] K24 intake Cam Comparison


Fredoops
25-09-2012, 10:32 PM
Repost from TSXClub
Source: http://www.tsxclub.com/forums/1st-gen-engine/60936-09-06-08-tsx-intake-cam-comparison.html


As measured on our cam profiling equipment:

The 09 TSX intake high speed lobe has less lift and duration than the 06-08 TSX (but only a little) It is better than the 04-05 TSX camshaft though.
The 09 TSX intake low speed lobe has more lift but less duration than the 06-08 TSX intake camshaft.

Our opinion is that the 06-08 TSX intake camshaft is the best choice for top end power.
curtis265
25-09-2012, 10:34 PM
Interesting. I wonder why.

Musta tried emphasizing torque
Fredoops
25-09-2012, 10:38 PM
Interesting. I wonder why.

Musta tried emphasizing torque

Emission and lower end torque, thats all i can think of.
kristrifo
25-09-2012, 10:48 PM
wait im confused...is there a difference between pre and post facelift models of the cl9?
Fredoops
25-09-2012, 11:58 PM
wait im confused...is there a difference between pre and post facelift models of the cl9?

quite a few differences supposedly
Andy
26-09-2012, 09:21 AM
quite a few differences supposedly

These differences are for the TSX only right?