View Full Version : Snapped top hat bolt
Tuan94
26-09-2012, 01:38 AM
Hey there guys. I'm about to buy a set of coilovers but one of the bolts on the top hat are snapped. Is there a replacement bolt I can install? If so, where can I buy it?
Cheers
Go to supercheap auto. Bring part of the bolt or the nut used with the bolt. There should be a chart where you can try and fit the nut/bolt in to find out the thread and pitch of what you have. Then just go buy matching bolt/nut you need.
But get us a pic of the bolt you're talking about. If its actually not removable from the tophat or not.
Tuan94
26-09-2012, 01:45 AM
http://www.godspeedproject.com/shop/images/suspension/civictophat_2.jpg
Pretty much that bolt on the right side on the front right strut of a Zeal Function coilover.
Thanks!
EKVTIR-T
26-09-2012, 01:45 AM
See if you can remove it first
See if you can remove it first
This. I'm afraid you wont be able to remove it. Dont know what you can do now... :S
Tuan94
26-09-2012, 01:52 AM
Thanks for the help guys, just going to have to check it out upon inspection
That bolt looks similar to a wheel stud. If that is correct, you are able to remove it by a press.
Don't try to hammer it etc as you may damage it further or the surroundings.
You shouldn't buy it till you find a solution to fix it.
If you can remove it, try bringing it to a bolt and nut shop/specialist and see if they have something that might work.
Tuan94
26-09-2012, 02:00 AM
Would using OEM top hats on them be a second solution to all of this?
Mykool comes to the rescue
senna
26-09-2012, 12:54 PM
The original top hats will not work with the diameter of the coilover springs and more than likely the shocks rod won't be long enough to go though anyway.
You will need to try and source a new stud from Zeal...
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.