K20A2 ORC Clutch Install - ORC Pressure Plate Bolts Torque Amount

[thien_is_cool]

Good morning all,

Currently re-installing an ORC clutch (non-silent type) to my K20A2. The flywheel is on and complete with the remaining clutch components only lightly secured.

Can I please be advised on the correct/recommended torque setting when tightening up ORC's pressure plate bolts? How many Nm or Ib/ft as I do not have the technical installation guide?

Kindly share any further tips/methods for successful clutch installs if you wish.

Thanks in advance
-Thien

[stndrd]

Email an authorised ORC dealer

[Snoop_gee]

http://www.ogura-racing.com/images/other/ob_faq_hyou_02.gif

[rossirider]

Do them up a little tighter than spec, I've heard stories of them loosening themselves undone.

[ceekay101]

Do it to spec and add some threadlock/Loctite for that extra security

[EK1.6LCIV]

blue thread locker :)

[mocchi]

http://www.ogura-racing.com/images/other/ob_faq_hyou_02.gif

do you know what pic youre putting up?