Will headers fit D16y4

[eren]

http://www.gumtree.com.au/s-ad/strathfield/engine-engine-parts-transmission/honda-stainless-steel-exhaust-headers-new-/1007348762
i know it's just photo's but if anyone know's it fit's that would be awesome

[eren]

Will (These) headers fit lol

[EKVTIR-T]

If they fit Accord then no they wont fit a dseries

[eren]

If they fit Accord then no they wont fit a dseries
there is 2 header's one for 2001 civic and accord . doesn't the 01 civic have a d series?
LoL at your DP btw xD made my day

[EKVTIR-T]

Ah I see there is 2 different ones lol,hadnt realised

I'd assume it will fit as both d then,but it looks to connect to your oem front pipe,the flange could be different even if the top part fits to head fine

Better to get a dseries guru to confirm

[eren]

Ah I see there is 2 different ones lol,hadnt realised

I'd assume it will fit as both d then,but it looks to connect to your oem front pipe,the flange could be different even if the top part fits to head fine

Better to get a dseries guru to confirm
This is confusing , maybe i should check on ebay , do you have any recommended header's for d-series ?

[mugen_ctr]

there is 2 header's one for 2001 civic and accord . doesn't the 01 civic have a d series?
LoL at your DP btw xD made my day

Would be a D17 motor u speak of since its 2001.... d17 are different to the usual D16 motors u will find in most 91 - 00 civic's, so even if u get d16 headers they still wont fit, unless ur prepare to do some serious customizing with $$$$ as the D17 have a inbuilt Cat converter if im not mistaken

[TbM]

This is confusing , maybe i should check on ebay , do you have any recommended header's for d-series ?

IIRC the d17 has different bolt pattern for the headers.

if your after cheap headers these will do the job

http://www.ebay.com.au/itm/HONDA-CRX-CIVIC-EG-EK-D15-1-5-D16-1-6-4-2-1-STAINLESS-STEEL-EXHAUST-HEADER-/200670165513?pt=AU_Car_Parts_Accessories&hash=item2eb8dfba09

[eren]

IIRC the d17 has different bolt pattern for the headers.

if your after cheap headers these will do the job

http://www.ebay.com.au/itm/HONDA-CRX-CIVIC-EG-EK-D15-1-5-D16-1-6-4-2-1-STAINLESS-STEEL-EXHAUST-HEADER-/200670165513?pt=AU_Car_Parts_Accessories&hash=item2eb8dfba09
i was just looking at these thank's alot


also thank's mugen_ctr & EK4VTIR

[ekx105]

Try N*Power headers. I heard their bang-for-your-buck. I put up a tread about them ages ago.. An people said that they were pretty goodfor what they are.

Edit; just saw link above

[eren]

Try N*Power headers. I heard their bang-for-your-buck. I put up a tread about them ages ago.. An people said that they were pretty goodfor what they are.

Edit; just saw link above
haha getting em soon , another quick question is the fitment good?
EditLoL: i read your thread , all good

[mugen_ctr]

haha getting em soon , another quick question is the fitment good?
EditLoL: i read your thread , all good

yes fitment is 100 percent, and because the outlet/donut is 2 inch same as oem, it will bolt onto the cat with zero issues. Only thing is, if u want a perfect o2 reading best to extend ur o2 sensor to the bung all the way down where it the y pipe merges into one for a accurate reading across all 4 cylinders... i never got around to it, got lazy lol, most ppl tend to just use the bung that is closes to the top as u dont need to extend anything

[eren]

yes fitment is 100 percent, and because the outlet/donut is 2 inch same as oem, it will bolt onto the cat with zero issues. Only thing is, if u want a perfect o2 reading best to extend ur o2 sensor to the bung all the way down where it the y pipe merges into one for a accurate reading across all 4 cylinders... i never got around to it, got lazy lol, most ppl tend to just use the bung that is closes to the top as u dont need to extend anything

That's what i wanted to hear thank you for your time :)

[3K9]

I'm looking to get one of this N* Power header soon as well, since from all those positive comments and recommendations on here.
Buying from Nahux's website (http://www.nahux.com/NPOWER/product.php?part_no=H-D16) will save you $9.99 compared to their Ebay page! ;)

[mugen_ctr]

That's what i wanted to hear thank you for your time :)

anytime :)


I'm looking to get one of this N* Power header soon as well, since from all those positive comments and recommendations on here.
Buying from Nahux's website (http://www.nahux.com/NPOWER/product.php?part_no=H-D16) will save you $9.99 compared to their Ebay page! ;)

Yes they are best money for value, and the product finish is top for the price u pay, cant fault them at all, performance wise, is spot on, no lose of power down low, good mid to high range, an makes the engine more alive :)

couple it with a 2.25 or 60mm cat back with a good high flow cat, u will notice it more :D

[dmad_dood]

Sorry if i hijack a bit but what is quality like of the n*power extractors compared to something like say.. xforce? Always been curious about the n*power and been wanting to do them for a while because i couldn't justify the $500.00 odd dollars on xforce extractors on a d-series when im sure quality and power are very similar. I've done an xforce catback so i've been meaning to finish it off for a while. Cheers!!

[2MPRS]

quality on the n*power is suprisingly good ive had them for over 2 years no problems