XXR 513 15inch to Fit Ek ?

[eren]

?????-thanks-?????

[2MPRS]

what do u specificly need lol 15s will fit on your car 15x8 is pretty safe something with like +20 offset sits fine with rolled gaurds

[mattsrea]

what offset and with you running?
- 7inch with mild offset should fit flush, 7inch with low offset would require some guard rolling depending on how you like the stance.
- 8inch offset with any offset would require guard rolling and possibly camber to sit flush

lower width of 7inch would sit inside the guards.

Correct me if im wrong guys. Hope this helps eren.

[eren]

it's 7inch offset , thank's :) , so this mean's if i lower it on these wheel's i have to roll guard's ?

[mattsrea]

it's 7inch offset , thank's :) , so this mean's if i lower it on these wheel's i have to roll guard's ?

What offset are you running? I'm running on 15x7 offset 38 and its pretty low and it sits flush. So i'm guessing offset lower then 30 will need guard rolling if you want it to st inside fender or sit flush.

[.Dave]

offset should be labelled with ET before it, i have +25 15x7 on my eg and it sits fine, id say itd be similar on an EK... anything less than 20 and you might need some rolling.

[eren]

What offset are you running? I'm running on 15x7 offset 38 and its pretty low and it sits flush. So i'm guessing offset lower then 30 will need guard rolling if you want it to st inside fender or sit flush.
i have no clue what my current wheel's have , they are lenso samurai's SR-01 but i was just asking about how the xxr's would fit lol

[eren]

it say's 7Jx17 Dafuq does that mean ?

[mattsrea]

offset should be labelled with ET before it, i have +25 15x7 on my eg and it sits fine, id say itd be similar on an EK... anything less than 20 and you might need some rolling. Ohh right sorry dude, i was just following what most people say. Ie 15x7 +38


it say's 7Jx17 Dafuq does that mean ?

that means 17x7 ? Pretty sure it does. Well i had a look at the XXR 513s and they only make it in 15x7 +15? from jdmyard? That would defs need guard rolling.

[eren]

Thank's to everyone's help , and i think i got a better handle on offset X)
http://1.bp.blogspot.com/-qQEMrWGB2pM/TWZugr4VfnI/AAAAAAAACTk/DNPaJsG2CxY/s1600/Hella-Flush.png

[eren]

btw rep for all of you :)

[mattsrea]

haha no worries man, post some photos of the new wheels when you get them fitted, keen to see :)

[eren]

haha no worries man, post some photos of the new wheels when you get them fitted, keen to see :)
thx sure will , not 100% tho , finding the right shoe's is hard :)

[mattsrea]

yeh thats true, well if you have money, should go with something like ssr's or something, but if your on a budget like i am, replica wheels and sportmaxx is the way to go :)

[eren]

yeh thats true, well if you have money, should go with something like ssr's or something, but if your on a budget like i am, replica wheels and sportmaxx is the way to go :)

sportmaxx 501's look pretty good :) might consider it

[.Dave]

oh right yeah nah its usually 15x7J (J= width) and then ET+15 or whatever the offset is... check that on the back of the rim of if your buying it ask the seller, they should eb able to tell you, but yeah some camber and guard rolling should fix it and it should fit

[eren]

oh right yeah nah its usually 15x7J (J= width) and then ET+15 or whatever the offset is... check that on the back of the rim of if your buying it ask the seller, they should eb able to tell you, but yeah some camber and guard rolling should fix it and it should fit
what camber kit would you recommend

[.Dave]

any will do the trick.... ive heard good things about the hardrace ones though.... and fairly easy to get.... also depends on what other suspension is on your car, if its on coilovers you can change to suit it so it doesnt scrub. decking it should give a little bit of camber anyway

[eren]

any will do the trick.... ive heard good things about the hardrace ones though.... and fairly easy to get.... also depends on what other suspension is on your car, if its on coilovers you can change to suit it so it doesnt scrub. decking it should give a little bit of camber anyway
Ok thank's :)

[mattsrea]

sportmaxx 501's look pretty good :) might consider it

imo i dont mind the 501s, its not the best and not what i prefer but gotta keep it for now till i can grab a new set lol. Here are some pics of mine lowered with them xxrs.
http://img803.imageshack.us/img803/2684/20121104194858.jpg
http://img571.imageshack.us/img571/5200/20121104194459.jpg

As you can see it sits flush. I'm planning on going a little lower at the front but my rears are fine, don't want it to scrub.

[eren]

imo i dont mind the 501s, its not the best and not what i prefer but gotta keep it for now till i can grab a new set lol. Here are some pics of mine lowered with them xxrs.
http://img803.imageshack.us/img803/2684/20121104194858.jpg
http://img571.imageshack.us/img571/5200/20121104194459.jpg

As you can see it sits flush. I'm planning on going a little lower at the front but my rears are fine, don't want it to scrub.
I Like it :D

[EG8 CIVIC]

i rekon go xxr 531 polished ones. chekem out

[charliebrown]

i rekon go xxr 531 polished ones. chekem out

lol @ overpriced reps. might as well get genuine wheels for cheaper

[mattsrea]

lol @ overpriced reps. might as well get genuine wheels for cheaper

Alot of people have been debating about geniune vs rep wheels. I mean if your on a budget and need wheels, then xxr's are the way to go. If your not on a budget then yeah get geniunes. But i gotta say if you wanna be geniune, buddyclub p1s are the way to go, heard 999automotive sells a set for about 700 shipped. 15inch size that is.

I'm thinking of getting P1s... if only your 92s were cheaper before cb, i woulda bought them off you :L I heard 15x8 92s sit flush with no guard rolling :O