CarCareProducts
19-11-2012, 02:50 PM
Nanolex Trim Rejuvenator and Sealant (http://www.carcareproducts.com.au/product/nanolex/trim_rejuvenator_and_sealant) is the latest in the range from the True 100% Nanotechnology Range of Products from Nanolex in Germany.
This product will rejuvenate your plastics from the typically greyed out finish caused by UltraViolet Rays & general atmospheric wear & tear, whilst offering a Factory satin-gloss like new finish to your Plastic Trims for months with its Nanotechnology Sealing properties. Definitely something that is a must for many of us who have Plastic Valances, Side Skirts, Bumper Trimmings, Wheel Arch Trimmings and simple Door Trimmings (even engine covers!) that have dulled out due to our harsh weather conditions here in Australia. Most especially up North and Far Western Australian Cities.
We have put this product through some thorough testing over the past 6+ months on cars that receive little attention other than a monthly wash (At the best of times) as well as a few that are in the tropics testing the durability and longevity of the Nanolex Trim Rejuvenator. (To which we thank those customers for testing this product for us!)
Below are photos from 2 of our own test vehicles (in house/family vehicles) that have Sealant on for the last few months
The Commodore pictured is coming close to 5 months at present, and the Fiesta well over 6 months. Of course you will find a variation on durability based on your location we are happy to admit this but you should definitely see at least 3 months your plastic looking naturally deep and back to 'as when you bought the car', if not better! And best of all, it repels water leaving your plastics look like that they are actually waxed!
Note; We do recommend you clean your plastics thoroughly prior to application of Nanolex Trim Sealant. Add a few drops on a small make up pads or foam applicator is all you need to get you need to spread the product. 1x 30ml Bottle can easily do a few cars.
Feel free to comment or ask any questions regarding the product :)
http://i302.photobucket.com/albums/nn91/carcareproducts/NanolexTrimBead.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0919.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0939-1.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0928-1.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0931-1.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0933-1.jpg
And a borrowed picture below from a DW member.
https://dl.dropbox.com/s/ou7rkxzw6uylk9u/6.jpg
This product will rejuvenate your plastics from the typically greyed out finish caused by UltraViolet Rays & general atmospheric wear & tear, whilst offering a Factory satin-gloss like new finish to your Plastic Trims for months with its Nanotechnology Sealing properties. Definitely something that is a must for many of us who have Plastic Valances, Side Skirts, Bumper Trimmings, Wheel Arch Trimmings and simple Door Trimmings (even engine covers!) that have dulled out due to our harsh weather conditions here in Australia. Most especially up North and Far Western Australian Cities.
We have put this product through some thorough testing over the past 6+ months on cars that receive little attention other than a monthly wash (At the best of times) as well as a few that are in the tropics testing the durability and longevity of the Nanolex Trim Rejuvenator. (To which we thank those customers for testing this product for us!)
Below are photos from 2 of our own test vehicles (in house/family vehicles) that have Sealant on for the last few months
The Commodore pictured is coming close to 5 months at present, and the Fiesta well over 6 months. Of course you will find a variation on durability based on your location we are happy to admit this but you should definitely see at least 3 months your plastic looking naturally deep and back to 'as when you bought the car', if not better! And best of all, it repels water leaving your plastics look like that they are actually waxed!
Note; We do recommend you clean your plastics thoroughly prior to application of Nanolex Trim Sealant. Add a few drops on a small make up pads or foam applicator is all you need to get you need to spread the product. 1x 30ml Bottle can easily do a few cars.
Feel free to comment or ask any questions regarding the product :)
http://i302.photobucket.com/albums/nn91/carcareproducts/NanolexTrimBead.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0919.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0939-1.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0928-1.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0931-1.jpg
http://i302.photobucket.com/albums/nn91/carcareproducts/DSC_0933-1.jpg
And a borrowed picture below from a DW member.
https://dl.dropbox.com/s/ou7rkxzw6uylk9u/6.jpg