Got new headers and need helpppp!

[Joeey]

I got new PLM big tube tri y headers and i am honestly clueless at what this part might be?

Any info guys?

http://www.boombopracing.com/ebay/pictures/HDS-AI94GSRTY-6.jpg

[Loagz]

Support that gets welded onto them and holds onto the chassis with 2 bolts I'm pretty sure. someone else confirm

[mocchi]

Looks like a weld on bracket to your header.
This then bolts to another bracket on engine block to secure your header more firm rather than Just header bolts.

[infurNOS]

Header bracket

Confirmation:

http://honda-tech.com/showthread.php?t=640204

[mnc]

Yup. It's a weld on bracket and totally up to you if you want to use it or not.

The factory 98 spec jdm dc2r 4-1 header have them for eg. So does many other Hondas, eg civics etc

I guess the benifit is less stress on the header to prevent it from cracking. Especially cracking where the tubings are welded to the manifold flange.

[Vvvtec]

Looks like a weld on header bracket to mount the header to the motor to reduce stress on welds etc

Confirmation:

http://honda-tech.com/showthread.php?t=640204 (http://honda-tech.com/showthread.php?t=640204)

[infurNOS]

Header bracket

Confirmation:

http://honda-tech.com/showthread.php?t=640204

lol..


Looks like a weld on header bracket to mount the header to the motor to reduce stress on welds etc

Confirmation:

http://honda-tech.com/showthread.php?t=640204 (http://honda-tech.com/showthread.php?t=640204)

[Joeey]

thanks guys for the replies.

i honestly tried to search what it was for but yielded no results at all.. :S

[Vvvtec]

lol..

welcome abourd

[mocchi]

thanks guys for the replies.

i honestly tried to search what it was for but yielded no results at all.. :S

well we have confirmed that it is a weld on header bracket to mount the header to the motor to reduce stress on welds etc

Confirmation:

http://honda-tech.com/showthread.php?t=640204

[curtis265]

I can confirm that i can confirm that it's a header bracket that needs to be welded to the piping

Confirmation:

http://honda-tech.com/showthread.php?t=640204

[Joeey]

I have conducted my own research while waiting for answers and have come to the conclusion that it is a header bracket that needed to be welded onto the piping!

Confirmation / According to thread:

http://honda-tech.com/showthread.php?t=640204

[Vvvtec]

I have conducted my own research while waiting for answers and have come to the conclusion that it is a header bracket that needed to be welded onto the piping!

Confirmation / According to thread:

http://honda-tech.com/showthread.php?t=640204

Dude, thats just repeating what everyone else told you

[curtis265]

I have conducted my own research while waiting for answers and have come to the conclusion that it is a header bracket that needed to be welded onto the piping!

Confirmation / According to thread:

http://honda-tech.com/showthread.php?t=640204

mate you're sounding like a broken record

[mocchi]

I have conducted my own research while waiting for answers and have come to the conclusion that it is a header bracket that needed to be welded onto the piping!

Confirmation / According to thread:

http://honda-tech.com/showthread.php?t=640204

m8 thats what infornus told you, you cant plagiarize that essay ok bro