View Full Version : wheel adapter
jayeg
25-11-2012, 03:36 PM
i have just done a 5 stud conversion i love the stock itr rims but they dont fill the guards like i would like them to has anybody used wheel adapters or had any experience with them here is a link
http://www.ezaccessory.com/5_Lug_Wheel_Adapters_No_Conversion_s/44.htm
Riced_Civic
25-11-2012, 04:11 PM
if u want to run spacers plz dont use cheap shit like that.
H&R are probably the best quality out there and are pretty cheap.
i run a 10mm bolt on for my car and they run fine for track, do daily should be no problems
connorling
25-11-2012, 06:41 PM
http://www.youtube.com/watch?v=DVg6uM-Oldg&feature=related
make sure you watch that before you install it yourself, his voice is annoying tho.
jayeg
25-11-2012, 07:26 PM
thanks guys i will give them a go what is the standard wheel width of a type r rim i want the rims to sit out as far as a 7/7.5inch wheel
charliebrown
25-11-2012, 07:35 PM
Agryd with riced_civic. Only spacers i'd run would be H&R hubcentric DRM series (bolts to hub and the spacer has it's own studs). Don't bother with the other series where you need to get extended studs put in. Looking at about $400/set for 25mm
thanks guys i will give them a go what is the standard wheel width of a type r rim i want the rims to sit out as far as a 7/7.5inch wheel
Assuming you're talking about the stock AUDM dc2r wheels, they are 15x6 +50
jayeg
25-11-2012, 08:14 PM
the h&r ones in the size i want are to pricey what do you guys think about these-
http://mywheeladapters.com/5x1143-5x475-5x1207-to-5X1143-Wheel-4-Adapters-P2039765.aspx#reviews
the 25mm wont be wide enough after something similar width to this
http://i722.photobucket.com/albums/ww224/madie_05/Yellow_Honda_Civic_EG_White_BBS_RS_01.jpg
charliebrown
25-11-2012, 08:19 PM
the h&r ones in the size i want are to pricey what do you guys think about these-
http://mywheeladapters.com/5x1143-5x475-5x1207-to-5X1143-Wheel-4-Adapters-P2039765.aspx#reviews
the 25mm wont be wide enough after something similar width to this
http://i722.photobucket.com/albums/ww224/madie_05/Yellow_Honda_Civic_EG_White_BBS_RS_01.jpg
lololol want to roll like a hard kunt but decent spacers too pricey. i wish you lick
jayeg
25-11-2012, 08:41 PM
i have been looking for wide rims but it seems no one is selling any and i dont want to spend alot on spacers then find rims
Alexx
25-11-2012, 10:16 PM
Take a read bud, this should cover most questions you have [Discussion] Wheel Spacers.... Different types, pros and cons, safety, and legality (http://www.ozhonda.com/forum/showthread.php?130387-Discussion-Wheel-Spacers....-Different-types-pros-and-cons-safety-and-legality&p=2699619#post2699619)
mocchi
26-11-2012, 07:01 AM
lololol want to roll like a hard kunt but decent spacers too pricey. i wish you lick
rolling like a hard kunt but decent spacers too pricey.
Confirmation:
http://www.ozhonda.com/forum/showthread.php?170317-wheel-adapter&p=3606830&viewfull=1#post3606830
eLtrix
26-11-2012, 09:13 AM
Running spacers myself on my rears because they were too deep. Running fine as a daily and on track. Get quality ones. Dont want that cheap shit on something like this. :)
jayeg
26-11-2012, 11:15 AM
thanks alexx
Symphorced
26-11-2012, 08:52 PM
Ran a cheap 15mm one on the track with no issues. Getting it off was another story.. the metal that the nuts were made out of were so soft that they kept rounding. :/
jayeg
07-12-2012, 06:53 PM
what is the stud pattern for itr 5stud
charliebrown
07-12-2012, 08:30 PM
5x114.3 bruh
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.