Screws for type r spoiler?

[Jdm.]

Hey guys, I've just gotten a type r spoiler but can't fit it on without screws, I've been to local shops like super cheap and bunnings but can't seem to find the screws that would go into both the spoiler and the boot, any idea where I can find them?

[GU357]

does the spoiler have holes in it and the boot have holes in it too?

[Jdm.]

does the spoiler have holes in it and the boot have holes in it too?

Yeah they both already have holes, I just need the screws

[JDM DC2R]

Take the hole spoiler to bunnings and try bolt after bolt. Somthing will fit. Go to bunnings warehouse not shop. They hold alot more!

[u mad?]

Get some naice 316 from a bolt shop m8

[Jdm.]

Take the hole spoiler to bunnings and try bolt after bolt. Somthing will fit. Go to bunnings warehouse not shop. They hold alot more!

Yeah that's what I did, but they don't have the screw that works on both sides.

[GU357]

is the spoiler designed for the car? is it honda oem item?

some spoilers might use different sized bolts 2 bigger front ones and the rear ones a bit smaller.

check that the spoiler has a threaded hoe for the bot and take it to bunnings warehouse and find 4 bolts that screw in, without binding. does the boot of the car have a threaded hole too?
i would imagine it has a regular hoe, so it should just fit

also when at bunnnings and u grab 4 bolts from a box good chance they arent a the same bolt, because pp take them out and put them back in the wrong place

[Jdm.]

is the spoiler designed for the car? is it honda oem item?

some spoilers might use different sized bolts 2 bigger front ones and the rear ones a bit smaller.

check that the spoiler has a threaded hoe for the bot and take it to bunnings warehouse and find 4 bolts that screw in, without binding. does the boot of the car have a threaded hole too?
i would imagine it has a regular hoe, so it should just fit

also when at bunnnings and u grab 4 bolts from a box good chance they arent a the same bolt, because pp take them out and put them back in the wrong place

It's an oem type r spoiler that I'm trying to fit onto a vtir dc2
I'm pretty sure the bolt sizes are all the same.
The thing is, don't I need the double sided screws to be able to screw it into the spoiler and the boot?
I can't Seem to find these anywhere

[GU357]

should just be a bolt that u can turn into the spoiler from underneath. so u lift ur boot up get someone to hold the spoiler in place as u poke the bolts through the boot from underneath then line the spoiler up to the bolts and twist them into the spoiler, no double sided screws. and it should be BOLTS not screws just to clarify.

[EKVTIR-T]

Theyre same size,see pic below

http://www.dptmotorsport.com/DPT/ebay/SPL-AI94-BK.jpg

[newpaddy3]

Go to bunnings.

That's what I did to get the correct size.