Where to find front hubs to fit EF9?

[rally-spec]

Recently have replaced front wheel bearings but there is still movement in the front hubs so I'm guessing it's the hubs and not bearings.... does anyone know what hubs will fit an EF9? It seems impossible to find these parts..

thanks.

[rally-spec]

http://www.ebay.com/itm/JDM-NTN-JAPANESE-PREMIUM-WHEEL-HUB-BEARING-42200-S04-008-HONDA-EF-EG-DEL-SOL-/260979284981?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACRX&hash=item3cc393dbf5&vxp=mtr

anyone know if these will fit?

[VT3C]

we swapped DA integra hubs over to EF9.. SLIGHT difference in length though (2-5mm) which adds some positive camber but if you're lowered it's fine. I think you can mix n match EG civic hubs also but then you have to swap upper arms, shocks, etc....

[rally-spec]

Cool, thanks, DA integra hubs will be much easier to find.

[grifty]

There is also a EF9 part out thread atm, might be worth checking out...

http://www.ozhonda.com/forum/showthread.php?171347-Complete-genuine-ef9-part-out

[rally-spec]

Thanks, thats excellent

[trism]

aussie delivered ED should be the same.

[chargeR]

aussie delivered ED should be the same.

Don't think they are, EF8/EF9 use a quite different knuckle and a bigger/beefier hub and bearing. The part number should be 44600-SK7-000 from HERE (http://www.crxsi.com/jdm/ef9-1101532/Steering-Brake-Suspension-Knuckle1.htm) and is the same as that of the DA and possible the prelude of the same generation from HERE (http://www.oemacuraparts.com/parts-catalog/acura/integra/1990/3dr-ls/ka5mt/chassis/front-brake). Call Honda and give them the part number, if it's the same as the DA one they should be able to sell it to you.

[markismaximus]

You must spread some Reputation around before giving it to chargeR again.

Nice bit of info

[trism]

yeah true that, silly me.