Wheel fitment on DC2 Integra?

[sonewby]

I currently have 17x7.5 +40 Lenso rims, and have been relatively happy with them, until last week I popped a flat tyre, pulled it off and found that the whole inside sidewall of the tyre has ripped through. Have I hit the tyre on my strut tower? I did the calcs and found that my rims sit 14mm closer to the suspension than stock.

The rims I was looking at are the Rota Grid V's, 16x8 +20, as pictured here: http://www.rotaaustralia.com.au/rota-gridv-16-8-4x100mm-et20-bronze-single-rim_p23280597.htm

Would these fit fairly easily? I'm not too fussed about getting my guards rolled or having minorly stretched tyres, but I don't really want to do anything too major.

My current rims sit like so: http://sphotos-g.ak.fbcdn.net/hphotos-ak-snc7/406948_4435932690149_994102954_n.jpg

Any help/advice/suggestions/beratings would be appreciated, cheers.

[dougie_504]

Did you hear any rubbing? What are the other tyres condition like?

[sonewby]

I have rubbing on the front left on my guards, but I have to fix my suspension on that side. I didn't hear any rubbing from the one I popped though, but I was not exactly listening for rear rubbing, so I can't really say. But what I do know is that my current rims are 16 mm closer to my suspension than stock rims, so I just figured that is what happened.

[dougie_504]

I don't think 16mm would be that big of a deal TBH.

Rear running you would certainly hear IMO, it's very loud.

I'm clueless :(

[stndrd]

I am running 16x8 +25 and it fits fine with guards rolled and pulled. There is a member on here with 15x9 +20something using standard camber arms on his eg so it can be done

[sonewby]

Yeah okay that's reassuring. I've found the rims I'm going to get, they're brand new work meister replicas for $600 a set, 15x7 +20 which will fit like so: http://farm3.static.flickr.com/2562/4009952289_35d3170134.jpg

What tire would I run on that? This is the first time I've changed a pair of rims/tyres or anything so I'm completely in the dark haha. I'm assuming 205/215, but I don't really know about profile and stuff, so help would be appreciated.

[sonewby]

Yeah okay that's reassuring. I've found the rims I'm going to get, they're brand new work meister replicas for $600 a set, 15x7 +20 which will fit like so: http://farm3.static.flickr.com/2562/4009952289_35d3170134.jpg

What tire would I run on that? This is the first time I've changed a pair of rims/tyres or anything so I'm completely in the dark haha. I'm assuming 205/215, but I don't really know about profile and stuff, so help would be appreciated.

[stndrd]

Run a 195/50R15