Bc coilovers setup

[speedo1]

Hi guys I just want to know what is the best set up for the bc br to have it on soft ride

Thanx

[curtis265]

soft..?

lower the dampers to their softest setting. It'll still be quite hard.

you can also go for lower springrates as well but that involves changing the springs

[08r3308]

If you want to be slammed go BC but be prepared for extra noises and sometimes clunks due to aluminium top hats.


If lowering up to 2" is plenty and want no noises close to stock smoothness , brake line bolt to be weldes to coilover like stock fo tein ss.

I had BC and was not happy so went to twin ss

[speedo1]

Its not slammed there is bout 2 1/2 fingre gab from the wheel guard

[08r3308]

only way turn dampers to soft and adjust from there, they are bouncy coil over unless damper is set to low.

otherwise spring rate change the only way.

[phat_nam87]

got bc's and they're very clunky and noisy when slammed.

[yungquan]

got bc's and they're very clunky and noisy when slammed.

I second that. Mine is very noisy as well. Especially right after the car is jacked off the ground. After a few days of driving the fluid seems to settle down a little and the noise becomes less apparent but still present. But thats what we get for the price. Apart from noise/clunks, they are really good coilovers for the price they charge :)