Diy : Custom Cupholders For Most Hondas

[Chi]

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Ok following parts are need to perform this complicated task.
-------------------------------------------------
Phillips Head Screw Driver
Flat Head Screw Driver (Just in case)
2xMacDonalds Cup holder trays (2nd one just in case you damage the first)
Some Scotch Tape
---------------------------------------------------
YOU WILL NEED A TRAY LIKE THIS !!!
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
http://img400.imageshack.us/img400/3683/diycupholders36op.jpg (http://imageshack.us)

1) Follow this link and steps to removing the bottom part of the centre console using you screw drivers to unscrew the bolts :
http://www.ozhonda.com/forum/showthread.php?t=13318

2) After you have taken it out the centre console , apply scotch tape to the base of the maccas cup holder trays (For some adhesive base) and spread out the interior trim or carpet where the centre console was previously then shove the cup holders into place like below.
http://img400.imageshack.us/img400/6784/diycupholders20sq.jpg (http://imageshack.us)


3) Wiggle the cup holders around until it moulds into place and then the final product should be like below.
http://img400.imageshack.us/img400/9452/diycupholders10in.jpg (http://imageshack.us)

Simple and effective way of getting a cheap cupholder.

[bennjamin]

tee hee i lub it.


*pre empting homo "serious" response*

this actually works :)

[SiR JDM]

hahaha nice work Chi!

Drinks between the passenger seat and the handbrake work just as good :thumbsup:

[panda[cRx]]

now thats what i call a DIY!!! :D

nice knob chi hehehehe

[joneblaze]

You got issues Chi boy...serious issues you need to address.... ;)

[zco]

lmao. you funny one. i was looking forward to installing one in my aunty's 96civic
coupe

[mojo the flashy monkey]

yay for cup holders weres the fiberglass ? lolu suck chi

[Sp3rMz]

:thumbsup:

I can confirm this works and is very handy LOL.

[bennjamin]

the origins are hazy...perhaps ancient China or so where old ox farmers used to cut a small hole in the seat - to hold their pearl milk tea while cruisng along.

[Kandy]

Hey!
When I shifted to 5th, my supersized lemonaide spilt down my legs into my floor mats, carpet, seats and peddles, the cup holder also got soaked and now is ruined. Whilst getting the liquid out of my car my McDonalds got cold and I had to go buy some more. My gearknob and steering wheel are all sticky too!!
I want compensation!!
;)

[Sp3rMz]

Hey!
When I shifted to 5th, my supersized lemonaide spilt down my legs into my floor mats, carpet, seats and peddles, the cup holder also got soaked and now is ruined. Whilst getting the liquid out of my car my McDonalds got cold and I had to go buy some more. My gearknob and steering wheel are all sticky too!!
I want compensation!!
;)

I believe that is due to shonky installation. Are you sure you followed the instructions properly? Or maybe you just don't know how to use such a sophisticated invention.

[Sp3rMz]

the origins are hazy...perhaps ancient China or so where old ox farmers used to cut a small hole in the seat - to hold their pearl milk tea while cruisng along.

Oh man that is a bloody pissa but you mayb right :thumbsup:

[Willxia]

good going chi
or you can just use tape and tape it on your dash console
but i think if it gets wet then you would need to go to maccas to get another holder :P

[Sp3rMz]

If you scared of getting it wet and all yucky, you can go to your local craft store and buy protective glue.

[SiR JDM]

but i think if it gets wet then you would need to go to maccas to get another holder :P

hahah well everytime you buy a new drink from maccas they're complimentary .. so if it gets wrecked no biggie.. quick easy *chi-eep*replacemt

[crxzzR]

cool
cover the cup holder in gladwrap..
or plastic bags?

[panda[cRx]]

whats next on the DIY list chi? :D

[J-MuN]

Hey!
When I shifted to 5th, my supersized lemonaide spilt down my legs into my floor mats, carpet, seats and peddles, the cup holder also got soaked and now is ruined. Whilst getting the liquid out of my car my McDonalds got cold and I had to go buy some more. My gearknob and steering wheel are all sticky too!!
I want compensation!!
;)
thats unlucky...
:rolleyes:

[Chi]

Hey!
When I shifted to 5th, my supersized lemonaide spilt down my legs into my floor mats, carpet, seats and peddles, the cup holder also got soaked and now is ruined. Whilst getting the liquid out of my car my McDonalds got cold and I had to go buy some more. My gearknob and steering wheel are all sticky too!!
I want compensation!!
;)

OH **** !!



DISCLAIMER ADDED!!!

[HRV-80Y]

Hey!
When I shifted to 5th, my supersized lemonaide spilt down my legs into my floor mats, carpet, seats and peddles ......;)

did u hav sum1 in d passenger seat help u lick it up...whoops i meant clean it up....


:p :p :p :thumbsup: :thumbsup: :thumbsup: :D :D :D

[mj3610]

and here i was all happi thinking this is a actual thread on installing propper cupholders for my EG :( they farkin put a lighter in da car but no cupholders.

[Paul1985]

i tryed those cupholders u can buy and u put em on your air vents.. they dont fit well on an EG dash... maybe u could buy these holders and do similar to the maccas tray.. could buy 2 of them if u want the passenger holder too :D

[tRipitaka]

and here i was all happi thinking this is a actual thread on installing propper cupholders for my EG :( they farkin put a lighter in da car but no cupholders.
just buy one from a wrecker..
shouldn't be more than 15 bucks

[lerroy]

are you gonna be selling these chi ?